Whenever there is a decision to be made regarding an investment in equipment or systems to make operating cost improvements, companies typically want to know if the up-front investment to […]
Is your pump delivering the flow and pressure that the performance curve says it should? If not, then the next question you are likely asking is: why not? A pump […]
Pumping fluids at extreme temperatures presents many challenges to the shaft sealing system. It must ensure the pumped fluid is safely contained while providing long-term reliability. Many pump operators are […]
Avoiding compressor dry gas seal contamination Dry gas seals are a crucial part of today’s centrifugal compressors. With dry gas seals, machined-in lift profiles on one side of the seal […]
There are many methods to pressurize the barrier fluid for a dual pressurized mechanical seal. Each method, or piping plan, uses a different mechanism to apply the pressure to the […]
In this technical whitepaper from Fluid Sealing Association Member, Richard Albery, Senior Gas Seal Engineer at John Crane, learn about how to seal high-speed shafts in pumps and compressors.
Water moves in a never-ending cycle, powered by nature to renew and replenish the Earth and all it’s inhabitants. Download this infographic, provided by the U.S. Department of Agriculture’s Natural […]
New Belgium Brewing Company (NBB) has conducted on-site wastewater treatment at their Asheville, NC brewery in phases. As part of Phase 2, NBB elected to go against historical convention and […]
The challenges facing process industries have changed although they continue to pump fluids, some hazardous or toxic. Safety and reliability are still of prime importance. However, operators increase speeds, pressures, […]
The intent of this specification is to work in partnership with Electric Motor suppliers to supply quality motors that consistently perform with the highest efficiency, improved life cycle and lowest […]
Combined cycle power stations are quick to build, extremely efficient, and release only limited amounts of CO2. Download this chart of a combined cycle power station circuit.