Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Pump Systems Matter has announced the date of the second Pump Testing for Rotodynamic Pumps webinar

Industry News

Pump Systems Matter has announced the date of the second Pump Testing for Rotodynamic Pumps webinar

 

Pump Systems Matter has announced the date of the second Pump Testing for Rotodynamic Pumps webinar of the 2012 summer. The session will be held on August 28, 2012 at 1:00pm EDT and will be led by Jim Swetye, Pentair Water. It will cover the scope of the recently published Rotodynamic Pumps for Hydraulic Performance Acceptance Tests (ANSI/HI 14.6) Standard.

The 1-hour-and-fifteen-minute webinar will also cover various aspects of the standard including:

  • Terms and definitions associated with the standard
  • Guarantee point and duty points for pump acceptance tests
  • Permissible amplitude of fluctuation of measurement uncertainty
  • Performance test acceptance grades and tolerances
  • Default test acceptance grades in appropriate situations
  • Usage of ANSI/HI Standard 14.6 to follow the prescribed testing procedures and
  • Usage of ANSI/HI Standard 14.6 to analyze the results from testing

Advance registration is required. All registered participants will receive a 25% discount code to use towards the purchase of the Rotodynamic Pumps for Hydraulic Performance Acceptance Tests (ANSI/HI 14.6) standard in their registration confirmation email and 1 PDH Credit upon completion of the webinar. Registration for the webinar is now available on the HI eStore.

 

Related Articles

Related Whitepapers

Specification Tips to Maximize Heat Transfer: Plate and Frame Exchangers

Choosing the right plate and frame heat exchanger for your application Heat exchangers are widely used in various industries including chemical, oil & gas, power…

Selecting Pump Upgrades and Operating Modifications for Existing Chilled Water System

Problem Natraj Arjunan, engineer at L&T Technology Services in Chennai India, was tasked with reviewing and simulating an existing chilled water system to diagnose system…

All-New Hydraulic Design of an Electrical Automotive Coolant Pump

CFturbo presentation at ISimT-24 in Munich/Germany! The paper “All-new Pump Design of an Electric Automotive Coolant Pump” describes a joint development between TENGAM Engineering and…

How to Read a Pump Curve (and Why you Want to)

If you have ever worked with pumps before, be it in an installation, maintenance, or engineering capacity, chances are high you have seen a pump…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *