Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Optimizing Pump Performance and Reducing Costs with the DERAGGER® Solution in Great Falls

Industrial Flow Solutions
IFS Optimizing Pump Performance and Reducing Costs with the DERAGGER® Solution in Great Falls

Optimizing Pump Performance and Reducing Costs with the DERAGGER® Solution in Great Falls

PROBLEM:

Great Falls, Montana, a city of 60,000 residents, manages a wastewater facility processing 100,000 gallons per day (GPD) with 30 HP pumps. For many years, the site struggle with pump ragging & frequent clogs.

To address this, the municipality installed a channel grinder before the wet well influent channel pump to reduce blockages. While the grinder helped, it did not fully resolve the issue. Clogs still occur regularly, 12 to 16 times each year. As a result, the pumps had to be lifted and cleaned regularly, and the channel grinder also required ongoing maintenance, adding to the overall maintenance costs and demands.

SOLUTION:

When the channel grinder was due for a rebuild, the local distributor suggested the municipality install a DERAGGER® as an alternative. The DERAGGER was installed on one of the 30 HP pumps, set to initiate a clean cycle at start-up, and equipped
with Real-Time Pump Protection™ to detect and prevent rag balls from forming.

The DERAGGER proved so effective that the channel grinder was never reinstalled. Eliminating the need for the grinder, the DERAGGER:

  • reduced energy consumption
  • decreased maintenance & labor time and costs
  • saved $13,000 annually in grinder rebuild costs

“The DERAGGER® was installed on one pump that normally has a grinder, while that was sent off for a rebuild. The DERAGGER worked incredibly well. We will be purchasing DERAGGER systems for other problem stations in the near future.”

– Randy Kerkes, Maintenance Manager Veolia, Great Falls WWTPGREAT

Related Articles

Where People Power Innovation

Where People Power Innovation

When it comes to understanding the heart of our industry, nothing compares to stepping onto the plant floor and seeing…

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…