Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Understanding the concept of Resistance in Motors

ALL-TEST Pro
ATP Ohmmeter

Understanding the concept of Resistance in Motors

An Ohmmeter is used to measure the electrical resistance between two points.  A Micro-ohmmeter is used to measure low resistance circuits.  A Meg-Ohmmeter is used to measure high resistance circuits.  The unit of measure for resistance is an ohm.

When testing electric motors, it is useful to know the insulation resistance between motor winding(s) and the frame ground.  This value will normally be in the range of tens to millions of ohms.

However, motor winding faults can also occur within the winding and is not detectable using the Meg or Micro-Ohmmeters.  For these types of tests, other types of instruments must be used, such as the portable, light weight, hand-held, de-energized motor testers offered by ALL-TEST Pro.

ALL-TEST Pro provides hand-held, battery operated, field portable test instruments designed to evaluate the entire electrical health of the motor.  This included detecting developing coil-to-coil, turn-to-turn, and phase-to-phase short circuits before they become catastrophic. These instruments will enhance trouble-shooting efficiency, improve your electric motor maintenance program, and help avoid unplanned production outages.

ALL-TEST PRO 33 IND™

 

Related Articles

ATP

Why Test Motors?

Because Motors Fail! Not all winding faults start as ground faults. Instead, they can start as a weakness in the winding…

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…