Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

360 Service and Support

Armstrong 360 Service and Support

360 Service and Support

Armstrong Fluid Technology is proud to announce a new 360 Service and Support program that is now available to their customers, on a 24-hour basis, 7 days a week.

The program draws on four key strengths within the Armstrong network:

  • Consultative Support for Solution Design
  • Supply Chain and Logistics Support
  • Project Advocacy for access to status information
  • Technical Service Support for rapid response support services

A key aspect of providing 360 Service and Support is a 24/7 Emergency Response Network, supported by Armstrong’s global network which includes representatives, technical service partners, suppliers, and logistics service providers.

Quick and professional service makes a big difference to customers. A good example of this can be found in a recent service call at a large datacenter. The customer experienced some efficiency problems in their cooling system. Armstrong Service Techs travelled to the site, found the source of the problem – inadvertent changes to on-site controls – and corrected it quickly. Critical cooling efficiency was restored, and the datacenter servers continued to operate as normal.

Information about the 360 Service and Support program is available at www.armstrongfluidtechnology.com/360serviceandsupport.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…