Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Watson-Marlow to Showcase Bredel Heavy Duty Sludge Pumps and Qdos Chemical Metering Pumps at WEFTEC® 2019

Chemical
WMFTG

Watson-Marlow to Showcase Bredel Heavy Duty Sludge Pumps and Qdos Chemical Metering Pumps at WEFTEC® 2019

Contributor: Watson-Marlow Fluid Technology Group

Visit Booth 2638 to view reliable and cost effective pump technology

Watson-Marlow Fluid Technology Group (WMFTG) is showcasing its Bredel line of heavy duty sludge pumps and Qdos range of peristaltic chemical metering pumps in booth 2638 at WEFTEC® 2019, the Water Environment Federation’s Annual Technical Exhibition and Conference. The conference will be held at McCormick Place, Chicago, IL from September 23rd– 25th, 2019.

The Bredel heavy duty sludge pumps on display are ideal for centrifuge and belt press feed. They feature only one wearing part – the hose – so there are no rotors, stators, or lobes to replace and no mechanical seals or packing to leak. Providing superior abrasive handling, Bredel pumps can handle flows to 475 gallons per minute (GPM) with suction lift to 30 feet, and they are dry running and reversible.

WMFTGAlso on display will be the Qdos range of chemical metering pumps, ideal for disinfection, pH adjustment, and flocculation of drinking water, wastewater, and industrial process water. With accurate linear flow rates from 0.001 to 31.7 gallons per hour at 100 psi irrespective of fluid viscosity, Qdos pumps were specifically designed to reduce chemical metering costs compared to conventional solenoid or stepper-driven diaphragm metering pumps. 

Bredel hose pumps and Qdos chemical metering pumps do not require high cost ancillaries such as degassing valves or back pressure valves to operate, and both pump ranges provide long maintenance intervals, so lowering the total cost of ownership.

Bredel hose pumps transfer abrasive slurry 24/7 at aluminium salt slag recovery plant

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…