Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Hydra-Cell® Provides Controlled, Accurate Delivery at Power Plant

Power & Energy
Wanner Hydra-Cell® Provides Controlled, Accurate Delivery at Power Plant Potassium Chloride

Hydra-Cell® Provides Controlled, Accurate Delivery at Power Plant

Potassium Chloride (KCl) build-up in the boiler system at a power plant corroded the tubing, which had to be replaced. If left unchecked, the KCl, produced in the catalysis process would also corrode the boiler.

Wanner Hydra-Cell® Provides Controlled, Accurate Delivery at Power Plant (1)

Pump Model: D03EKTJCCTTA
Flow: 1.3 gpm (5 l/min)
Pressure: 100 psi (7 bar)
Application: Injecting Ammonium Sulfate to
reduce KCl inside a boiler

A Hydra-Cell D03/G03 was installed to inject Ammonium Sulfate into the process and act as a KCl reducing agent. With its compact design, Hydra-Cell was easy to install on-site.

Since Hydra-Cell provides precise, accurate metering with remote flow control, there is no need for on-site stroke adjustment required with conventional metering pumps. Hydra-Cell also has a multiple-diaphragm design that provides smooth flow, so an expensive pulsation dampener was not needed.

If the proposed legislation is enacted, limits will be placed on KCl in all power plants. Similar chemical injection systems will be installed.

Read more about Hydra-Cell Diaphragm pumps!

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…