Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

The ProFlex™ Series 730CBD Coarse Bubble Diffusers

Industry News
Proco The ProFlexTM Series 730CBD Coarse Bubble Diffusers (1)

The ProFlex™ Series 730CBD Coarse Bubble Diffusers

Proco Products, Inc. is excited to announce a new addition to our ProFlex™ Rubber Check Valve product line! Let us introduce you to the ProFlex™ Series 730CBD Coarse Bubble Diffusers – a sought-after pollution control technology used to aerate or mix wastewater for effluent/sewage treatment.

A coarse bubble diffuser is used to ensure that sewage and Hi SG ( specific gravity) content is properly “agitated”, or diffused to ensure proper mixing. Diffusion is a term used to guarantee that when sewage is put into a holding tank, it is not allowed to settle into the bottom of a tank. The ProFlex™ 730 CBD is an engineered molded valve which, when submerged and charged with air, will create a series of bubbles strong enough to capture the sewage effluent and carry it to the surface of the tank.

Benefits of The ProFlex™ 730CBD

The ProFlex™ 730CBD, with its unique elastomeric duck bill design, is always in a 100% closed position and relies on static head to open. Thus, the instant there is an absence of inlet pressure, the valve is closed bubble tight ensuring unwanted media does not flow back into the manifold.

The ProFlex™ 730CBD all-elastomeric design offers no concern for maintenance or costly downtime resulting in a perfect diffuser system, designed to provide long-life features.

The ProFlex™ 730CBD also features a “Hex” 3/4 NPT SS nipple instead of a standard SS pipe nipple. This feature allows the owner/contractor a hassle-free install experience, ensuring a positive seal on the manifold without worry of breaking the adapter or the manifold’s inlet fitting. EPDM or Neoprene is the most specified elastomer, and both offer superb flexibility along with long-life designed elastomers. (Other elastomers are available).

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…