Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Comprehensive Mechanical Seals Guide

Pumps & Operations

Comprehensive Mechanical Seals Guide


Mechanical seals can be found throughout all industrial processes. There are many different types of mechanical seals available in multiple designs.

What Is a Mechanical Seal?

SEPCO DRP mechanical seal

This mechanical seal is a cartridge type.

An end-face mechanical seal is a device on a rotating shaft used to keep contaminants out and fluids in. It prevents the fluid moved through an asset, most often a centrifugal pump, from leaking. These seals are located in the asset’s stuffing box or seal chamber. This is the area of the pump where the pump shaft connects to the drive (an electric motor, for example).

Except for air seals, which will be discussed later, most types of mechanical seals consist of two flat faces that are installed perpendicular to the shaft. One of the faces is mounted stationary to the seal chamber housing. The other face rotates with the shaft to provide the primary seal. Axial mechanical force and fluid pressure maintain the contact between the seal face materials. This contact prevents leakage and retains the fluid within the pump.

The Three Types of Mechanical Seals

Three types of mechanical seals are used in process equipment:

  • Cartridge
  • Component
  • Air

A cartridge-mounted, end-face mechanical seal is a completely self-contained unit that houses the sealing components—a gland, sleeve, and hardware. A cartridge seal allows the unit to be preassembled and preset by the manufacturer. With the manufacturer handling these tasks, installation and maintenance are simplified. Cartridges may be equipped with one or two seals, depending the application’s requirements.



Air seals do not touch the shaft of equipment.

Component, end-face mechanical seals consist of a separate rotating member and a stationary seat that mount in a gland or housing. Since they are not preset, installation and maintenance are more complicated than cartridge seals. Installing these requires experienced technicians who can properly install and adjust them.

Air seals are noncontacting, pneumatic devices engineered to seal rotating shafts. These seals are primarily installed in dry powder or slurry applications. They protect against product loss, emissions, and contamination by using small amounts of air or inert gas. This air is throttled to create positive pressure and an effective seal.

Seal Chamber Types
The type of seal chamber affects the seal design and type chosen.

SEPCO Bore-Types

Stuffing box bore types

The correct bore size must be known to ensure that the ideal mechanical seal type is selected.

Seal Components

Most mechanical seals have five parts:

  • Rotating primary face – Fixed to and rotates with the shaft and seals against the stationary primary sealing element
  • Stationary primary face – Fixed to the stationary housing of the pump, mixer or other equipment through which the rotating shaft passes and seals against the rotating primary sealing element
  • Mechanical loading devices – Biases the primary sealing elements in contact to initiate sealing. These can be a single spring, multiple springs, wave springs, or metal bellows.
  • Static and/or dynamic secondary seals – Seal between the mechanical seal components and the equipment shaft and housing that compensates for any shaft movement that may damage the seal faces.
  • Drive mechanisms – Set screws and drive pins are examples of drive mechanisms used to provide rotation to the rotating primary seal face

    SEPCO Seal-Parts

    The parts of a mechanical seal

More to Come

In summary, knowing the mechanical seal types and the parts that make them up is only the beginning. Assessing the application, installation, and operation (with leakage limits) helps determine which seal type will be selected and how well it will perform in the system. This important decision factors into overall system reliability.

About the Author

SEPCO Tommy-SealesThomas (Tommy) Seales is the Mechanical Seal Division Product Manager for Sealing Equipment Products Company (SEPCO). He is primarily responsible for managing the engineering department and overseeing new product development. His responsibilities also include providing any and all domestic and international technical support for the distributor and outside salesforce for SEPCO. Seales has worked at SEPCO for more than 42 years and has been the product manager of the mechanical seal division for 35 years. He is an honorary lifetime member of the United Who’s Who Registry of Executives and Professionals. Seales may be reached at

Related Articles

Related Whitepapers

Bearing Protection Best Practices

Electro Static Technology (EST, AEGIS®) guarantees that AC induction motor bearings will not fail from electrical fluting damage when AEGIS Shaft Grounding Rings have been…

Positive Displacement Pumps Best Suited For Liquid-Transfer Applications

Pumping applications can range from being simple – fluid transferring operations that move product from one tank, container or truck to another – to complex…

Accurately Predict Transient Fluid Forces in Piping Systems, Part 2: Applications

Part 1 of this series discussed in detail how to accurately calculate the reactions induced by pressure transients that travel at acoustic velocity in either…

Accurately Predict Transient Fluid Forces in Piping Systems, Part 1: Fundamentals

Changes in the operation of piping systems – like valve closures or pump starts – propagate pressure waves that travel at acoustic velocity throughout the…


Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community

By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact