Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Neptune™ Release Additional NSP Series Solenoid Pump and NXP Series Stepper Motor- Driven Pump Models

PSG
PSG Neptune™ Release Additional NSP Series Solenoid Pump

Neptune™ Release Additional NSP Series Solenoid Pump and NXP Series Stepper Motor- Driven Pump Models

By: PSG

Neptune™ is pleased to announce the availability of 35 additional models as part of the Phase II release of its NSP Series Solenoid Metering Pumps and NXP Series Stepper Motor-Driven Metering Pumps.

The new additions will include more models with the acrylic degassing head (ACRYL) option, along with the standard polyvinyl chloride (PVC), polypropylene (PP), and polyvinylidene fluoride (PVDF) material options.

These new models feature the same capacity ranges from 0.09 gph (0.35 L/h) to 8.1 gph (30.66 L/h) and backpressure capabilities of 43 psi (3 bar) to 232 psi (16 bar). The availability of these new models and material options significantly increases the application range of the NSP Series and NXP Series, making them the go-to choice for virtually any chemical-handling application that requires reliable and accurate dosing.

Below are the updated dimensional drawings for the NSP and NXP series portfolio.

PSG Neptune™ NXP-M and NXP-P 68 through NXP-MP 285 (PVC, PP, PVDF)

NXP-M and NXP-P 68 through NXP-M/P 285 (PVC, PP, PVDF)

PSG Neptune™ NXP-MP 375 through NXP-MP 810 (PVC, PP, PVDF)

NXP-M/P 375 through NXP-M/P 810 (PVC, PP, PVDF)

PSG Neptune™ NSP-A and NSP-P with dosing head made of PVC,PP, or PVDF

NSP-A and NSP-P with dosing head made of PVC,PP, or PVDF

PSG Neptune™ NSP-M with dosing head made of PVC,PP, or PVDF Solenoid Pump

NSP-M with dosing head made of PVC,PP, or PVDF

Read more about Neptune™ NSP Series Solenoid Pump!

 

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…