Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Low and No Cost Operational Measures [on-demand webinar from JKMuir]

JKMuir
Low and No Cost Measures for Water and Wastewater Treatment Plants [on-demand webinar by jkmuir]

Low and No Cost Operational Measures [on-demand webinar from JKMuir]

By: JKMuir

Opportunities to reduce energy usage and costs through low and no cost operational measures are abundant at most wastewater treatment plants. This 45-minute on-demand webinar focuses on opportunities for energy and cost savings that do not require large capital investment. Topics include control modifications and low-cost equipment replacement projects that are easy to implement and cost effective. A few control system modifications discussed include pump and blower optimization, demand control, wetwell level setpoints, VFD setpoints, and modifications to HVAC systems. Low cost equipment replacement opportunities, such as the replacement of defective and improperly sized valves, and the addition or replacement of instrumentation is also addressed. Specific examples from wastewater facilities are provided where no and low-cost energy saving operational measures have been identified and the resulting cost savings and return-on-investment were quantified.

Complete the form to watch the on-demand webinar now!

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…