Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DERAGGER®: Preventing Pump Ragging and Belt Failures in Arkansas Belt-Drive Systems

IFS DERAGGER®: Preventing Pump Ragging and Belt Failures in Arkansas Belt-Drive Systems

DERAGGER®: Preventing Pump Ragging and Belt Failures in Arkansas Belt-Drive Systems

PROBLEM:

In the city of Sheridan, Arkansas, a number of belt-drive pumps were used to serve a population of nearly 5,000 residents. Due to frequent clogging and “ragging” of these pumps, the belts were constantly wearing out and required regular replacements — often multiple times a month.

Prior to the introduction of the DERAGGER® system, a set of new belts would only last about three days before needing replacement. This led to a significant increase in workload for the maintenance team, along with higher costs for both labor and the necessary parts.

SOLUTION:

The installation of DERAGGER+™ devices on these pumps, equipped with Real Time Pump Protection™, effectively prevented ragging and ensured the pumps remained clear and operational.

The results were immediate — ragging was completely eliminated, and, most importantly, the team no longer had to deal with the constant replacement of burnt-out belts. This not only streamlined operations but also significantly reduced maintenance efforts.

“We were replacing belts on our pumps two or three times per month. They were burning out from the pumps getting ragged up, and in the months since we put in the DERAGGER®, we haven’t had to replace one belt.”

– Dennis Rogers, Sheridan Wastewater

Related Articles

Where People Power Innovation

Where People Power Innovation

When it comes to understanding the heart of our industry, nothing compares to stepping onto the plant floor and seeing…

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…