Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Town of Hayden Trusts Barnes Pumps for New Waste Water Treatment Plant

Crane Pumps & Systems
Crane Pumps

Town of Hayden Trusts Barnes Pumps for New Waste Water Treatment Plant

The Barnes® Solids Handling Series The municipality in Hayden, Arizona has been purchasing Barnes pumps for the past 18 years from Pump Systems, Inc. in Gilbert, Arizona. So when the decision was made that the municipality would build their first ever waste water treatment plant they knew they wanted to purchase Barnes pumps.

The construction on the new Waste Water Treatment Plant and Waste Water Collection Systems was completed in five phases and is now almost ready to be turned over to the Town of Hayden. The plant will have a capacity of 80,000 gallons per day on average and 200,000 gallons per day peak daily flow. The plant has been built on 2.21 acres in town.

Gary Cruz, Operations Supervisor for the Town of Hayden met with David Donovan from Pump Systems, Crane Pumps & Systems Channel Partner to decide which pumps would best serve the town. They selected the Barnes solids handling series; Barnes 4SE, Barnes 3SE and Barnes 4SHV. The 4SE pumps are installed inside the plant and the 4SH pumps are being used after treatment to move the reuse water.

The ease of installation and confidence in the performance keeps the Town of Hayden loyal to the Barnes brand.

 

 

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…