Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Chesterton Webinar: Effective Environmental Controls for Sealing in Water & Wastewater Plants

A.W. Chesterton
AW Chesterton Wastewater pump sealing

Chesterton Webinar: Effective Environmental Controls for Sealing in Water & Wastewater Plants

Best Practices for Extending Mechanical Seal Life and Increasing Pump Reliability

A.W. Chesterton Company is hosting its third free webinar in a 5- part series addressing pump sealing, energy reduction, and infrastructure challenges faced by the Water and Wastewater industry. Webinar 3: ”Effective Environmental Controls for Sealing in Water and Wastewater — Not Just Water Down the Drain” will be held on August 5, 2016—11:00 A.M. EDT.

This webinar will address the environmental control strategies commonly used in water and wastewater pumping systems. Environmental controls are the life support system for mechanical seals in pumping equipment. Selecting the proper seal type, materials, and environmental controls are vital in establishing long-term pump reliability.

Chesterton sealing expert Paul Keough will discuss specific piping plans for typical applications and common pump configurations as well as some of the most frequent oversights when environmental control specifications are created. He will also examine the costs associated with flush water systems and strategies that can be utilized to minimize these costs.

Register here: https://www.eventbrite.com/e/improving-efficiency-while-managing-infrastructure-assets-tickets-25602995248

About Chesterton

A.W. Chesterton Company operates in over 100 countries around the world and is recognized as a leading international provider of knowledge backed solutions, customized programs, and hands on expert service for Rotary, Stationary, and Fluid Power equipment platforms; supported by a comprehensive line of industrial fluid sealing systems, high performance protective coatings, and specialty industrial lubrication.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…