Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Chesterton Introduces Grout Resurfacer Coating to Help Improve the Safety of Damaged Concrete Flooring

A.W. Chesterton
AW Chesterton

Chesterton Introduces Grout Resurfacer Coating to Help Improve the Safety of Damaged Concrete Flooring

ARC EG-1 is a rapid setting epoxy grout from Chesterton that helps industrial plants and other commercial facilities repair large, eroded/uneven sections of concrete flooring back to a level grade.  It can also be used to “form” concrete elements such as pier supports, pump bases, curbs and containments. The product is normally applied at a depth of ¼” up to 12”.

ARC EG-1 is a 100% solids, three-part epoxy grout which uses a low viscosity, moisture tolerant epoxy chemistry, reinforced with a pigmented and graded dry blend of silica aggregates. It can be quickly top coated with other ARC coatings for improved chemical or mechanical protection.

ARC EG-1 bonds firmly to dry or damp concrete, making the substrate dimensionally stable and suitable for top coating with compatible Chesterton coatings for improved chemical resistance. It is easily applied by trowel and sets fast to allow for quick over coating in as little as 6 hours.

The product is ideal for applications where concrete rebuilding and resurfacing is required and acts as a stable surface for subsequent topcoat application when required. ARC EG-1 is available in gray in a Patch Kit or Bulk Kit.

About A.W. Chesterton Company
Operating in over 100 countries around the world, Chesterton is recognized as a leading provider of knowledge backed solutions and expert service for Rotary, Stationary, and Fluid Power equipment supported by a comprehensive line of industrial fluid sealing solutions, high performance protective coatings, and specialty industrial lubrication/MRO products.

Chesterton Introduces S7 AR Erosion-Resistant Coating Designed to Protect Flue Gas Desulfurization Systems

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…