Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Geared Motor Solution For Lumber Tilt Hoists

Motors & Drives

Geared Motor Solution For Lumber Tilt Hoists

A robust electric geared motor solution was needed by a lumber-handling equipment manufacturer to replace hydraulic cylinders on its tilt hoists. Full bundles of stacked, rough-cut lumber are moved onto the hoist during operations. Then the entire bundles are lifted and tilted. Slowly the tilted hoist raises the bundle, single layers/rows of boards are released from the top of the bundle and slide onto a feeder conveyor that transports the boards for further finishing.

Bauer supplied BF60 parallel shaft gear motors to meet the customer’s application
requirements. Each tilt hoist utilizes two 30 HP geared motors that drive long ball
screws. The electric gear motors combined with the ball screws provide a more precise,
controlled movement of the hoist compared to hydraulic cylinders. The possibility of
damaging fluid leaks and cylinder creep/drift are also eliminated.

BF Series gearboxes feature high-tensile, case-hardened steel gearing with strong,
non-flexible pinion design and oversized input bearings to ensure exact tooth meshing
and longevity of the gearbox. Gearing is enclosed within a thick, reinforced, high-tensile
cast housing. Units feature a 3-piece labyrinth input seal to protect against oil leakage
in any orientation. Aluminum die-cast motor housings, bearing covers and terminal
boxes provide maximum corrosion-resistance. An aluminum die-cast cage rotor
ensures high reliability at high starting torques and low starting currents. Bauer motors
are manufactured in-house allowing for customization to meet specific application
requirements. All Bauer motors are inverter duty and IP65 rated as standard.

Altra Motion BF Series Geared MotorsHighlights

• BF Series features an economical and space-saving shaft mount design with integrated torque arm for easy and convenient mounting
• Motor power from 0.03 kW to 75 kW
• 10 gearbox sizes for torques from 90 Nm to 18500 Nm
• High-efficiency and robust gearing design impervious to shock and vibration
• Enclosure IP 65 as standard, IP66 (optional)
• Corrosion protection CORO1, CORO2, CORO3

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…