Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ACHEMA presentation provides focus on the use of extractables data from single-use components for risk assessment

Chemical
WMFTG

ACHEMA presentation provides focus on the use of extractables data from single-use components for risk assessment

A presentation to be delivered at ACHEMA 2018 by the Group Product Compliance Manager at Watson-Marlow Fluid Technology Group, Sade Mokuolu Ph.D, will focus on how to reduce risk in the product development process through the use of validated fluid path solutions.  Dr Mokuolu’s presentation is part of the event Process analytical technology – Bio-chemical processes II.

In her presentation (which takes place on 13.06.18 at 16.00-16.30 in Hall CMF ‘Harmonie 1’) Dr Mokuolu will detail how to qualify single-use (SU) assemblies consisting of tubing, connectors, gaskets and clamps into custom end-to-end fluid paths simplifying compliance with the latest industry regulations and GMP requirements.

Dr Mokuolu’s paper will go on to describe the extractables studies undertaken on different types of SU components, in particular fluid path products such as platinum-cured silicone tubing and polypropylene connectors.

Dr Mokuolu explains: “There is intense debate on extractables between suppliers and end-users of SU components. Knowledge of extractables profiles can aid risk assessment strategies considerably and profiles can be used to understand whether there are components of potential concern. My presentation provides an essential forum for learning and discussion on an important topic that impacts on users’ ability to meet stringent regulatory compliance.”

The presentation will also highlight the methodology and the range of analytical techniques used to provide an extractables profile for fluid contact SU components.

Dr Mokuolu will provide details on how different extraction solvents can provide a range of unique extractables profiles. In particular, how organic solvents can be more extracting than aqueous-based solvents.

Discussion points will include the differences in extractables profiles using alternative sterilisation methods, and the effect that post-curing of silicone tubing has on the presence of cyclosiloxanes.

A white paper to support this presentation will be available to download following ACHEMA – register your interest here.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…