Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Watson-Marlow 530 pump provides accurate and consistent sunscreen transfer

Chemical
WMFTG 530 peristaltic process pump

Watson-Marlow 530 pump provides accurate and consistent sunscreen transfer

The Acorn Group is benefiting from dosing accuracy and consistency provided by a Watson-Marlow 530 peristaltic process pump at its Johannesburg production plant, where it is being used to transfer bulk sunscreen lotion.

The Acorn Group is a dynamic, family-owned business that is home to a wide range of domestic products, extending from detergents to insect repellents. Acorn owns, manufactures and markets brands such as Tabard, Vapona, Teepol, and Carbro. The Group also offers a broad-spectrum sunscreen range, providing world-class protection against the sun’s harmful UVA and UVB rays.

Accurate and reliable

Sunscreen is not viscous or shear sensitive, and there are no extreme temperatures involved in its production. With these facts in mind, the job of pumping this product, appears straightforward. However, there is a key requirement for precision, which meant the search for a suitable pump as part of this brand new product and application had to focus on accuracy and quality. Using the Watson-Marlow 530 process pump with a 520R2 pumphead and silicone continuous tubing, the pump is capable of dosing with +/-1% accuracy.

Robert Verseput is a representative from Acorn who is helping to enhance its business model and expand its distribution network globally. He says: “To provide a summary of the process, bulk sunscreen is drawn from a 100-liter stainless steel holding tank with constant head height, and transferred via the Watson-Marlow 530 pump into aerosol tins. The accuracy and consistency of dosing via the pump is thus critical. Thereafter, a valve is added and crimped, and propellant introduced via the gassing plant.”

Stand-out performance

A Watson-Marlow 530 pump was the obvious choice for many reasons. For instance, this pump type maintains process integrity and offers flow rates up to 3.5 l/min at 2 bar pressure. In addition, there are four drive and five pumphead options, along with a wide range of tube sizes and materials.

At Acorn, the 530 pump runs for approximately 7 hours a day, during which it transfers around 400 liters of sunscreen.

Enhancing GMP

“I’ve used peristaltic pumps extensively in a variety of applications,” states Mr. Verseput. “They are the only pumps I will use for a number of reasons. Firstly, they enhance GMP by having minimal product-machine contact points and allowing for product dedicated tubing. They are also accurate, easy to clean and versatile over a variety of applications and product viscosities. In addition, this pump type allows for a reverse cycle at the end of the fill cycle, minimizing post-fill drip.”

The Watson-Marlow 530 pump at Acorn is located in a pharmaceutical GMP production area as a stand-alone foot-operated filler. 

“The fact that 530 pump is robust was a big factor in the purchase decision. Add this to its durability, largely maintenance-free operation and compact dimensions, and it’s clear to see the appeal” says Mr. Verseput.

www.wmftg.com

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…