Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Hydra-Cell® Shows its Maritime Versatility

Marine
Wanner Hydra-Cell® Shows its Maritime Versatility

Hydra-Cell® Shows its Maritime Versatility

An operator of a large freight ferry selected Hydra-Cell seal-less pumps for three different applications on its vessel. This would not be unusual because Hydra-Cell is offered in a wide range of models, capacities, and materials of construction. The operator, however, requested that all three pumps be built to the same specifications as to allow maximum on-board versatility. In addition, the pumps were individually tested, inspected and certified by DNV, one of the world’s leading certification organizations.

Wanner Hydra-Cell® Shows its Maritime Versatility (1)

Pump Model: M03XKSJSNETK Flow Capacity: 3.1 gpm (11.7 l/min) Pressure Rating: 1200 psi (83 bar) Applications: Feeding methanol, circulating boiler water, and pumping de-mineralized water.

Duty #1: Methanol Feed
0.5 to 1.9 gpm (2 to 7.3 l/min) flow; 363 psi (25 bar) pressure; 68 ̊F (20 ̊C) liquid temperature
Duty #2: Boiler Water Circulation
0.13 to 1.5 gpm (1.13 – 5.67 l/min) flow; 232 psi (16 bar) pressure; 194 ̊F (90 ̊C) liquid temperature
Duty #3: De-mineralized Water (BFW)
1.1 gpm flow (4 l/min); 392 psi (27 bar) pressure; 68 ̊F (20 ̊C) liquid temperature

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…