Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Hydra-Cell® Replaces Piston/Plunger Pump and Decreases Maintenance

Food & Beverage
Wanner Hydra-Cell® Replaces PistonPlunger Pump and Decreases Maintenance (1)

Hydra-Cell® Replaces Piston/Plunger Pump and Decreases Maintenance

A meat processing plant used a piston/plunger pump to clean conveyors, tables, machinery, and other equipment. The demand to accommodate multiple showers with the necessary increase in pressure caused mechanical seal and packing failures. This resulted in significant downtime and maintenance costs that delayed the sanitation process.

Wanner Hydra-Cell® Replaces PistonPlunger Pump and Decreases Maintenance (1)

Pump Model: D35EKBTHFECE
Flow Rate: 34 gpm (128.7 l/min)
Pressure: 700-to-800 psi (48-to-55 bar)
Application: High-pressure sanitizing of meat
processing equipment

The processor replaced the piston/plunger pump with two Hydra-Cell D35/G35 seal-less pumps. With no seals or packing to wear or replace, the Hydra-Cell pumps have decreased service time and maintenance costs. Although one D35/G35 was intended as a backup, the two pumps work in unison when there is high demand. Operating with 30 hp motors, the Hydra-Cell pumps also meet the flow-pressure requirements with greater energy efficiency, delivering additional cost savings.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…