Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Trade Bodies Enjoy Successful Joint Conference

Industry News
Trade Bodies Enjoy Successful Joint Conference

Trade Bodies Enjoy Successful Joint Conference

By: Europump

Alongside their respective annual meetings, CEIR, Pneurop, and Europump recently held a Joint Conference to address and consider the EU’s roadmap for industrial support, as it affects their shared interests.

Under the working title of ‘Sustainability and Decarbonisation: how can the EU’s industrial policy support industry’s efforts?’, the event’s core aim was to assess the European Commission’s assertion, following the latest updates to its New Industrial Strategy, that it will rely heavily on industry to deliver on the major challenges faced by the economies and societies across Europe.

Trade Bodies Enjoy Successful Joint Conference (1)

Tom van Ierland, Head of Unit, Directorate-General Climate Action, European Commission

Quite a task given the complexities surrounding such a wide-ranging set of demands and aspirations, the magnitude of which was clear throughout the extensive discussions that took place. A great deal of ground was covered, both in the plenary debate with representatives from the European Parliament and European Commission, as well as in the parallel technical sessions. Here, Ken Hall of Calpeda Pumps, and Honorary Life Member of the Europump Council, offers a brief resume of the main touchpoints.

Trade Bodies Enjoy Successful Joint Conference

Ken Hall, Honorary Life Member, Europump Council

The event considered climate change, research and innovation, digital transformation, CBAM, sustainable taxonomy, circular economy & eco-design, as well as the restriction of certain metals and substances due to environmental concerns. However, it became obvious that whilst the EU Institutions and our pumps, compressors and taps and valves
sectors are following the same goals, the challenges we encounter on this journey are not always the same.

Trade Bodies Enjoy Successful Joint Conference (2)

Maria da Graça Carvalho, Member of the European Parliament

Our societies and our economies are changing, and at a faster pace than ever before, and this affects the way we consume and in turn the way we produce, which inevitably impacts on the requirements and expectations for those operating within the pumps, compressors and taps and valves industries.

There is no question that Europe needs to become a climate-neutral continent – may be not the first to achieve that accolade, but one that must aspire to the attainment nonetheless – and as such ‘green’ will become ever more prominent on the agenda of the EU and its technology industries; that there is no getting away from.

Attendees also learned that the two biggest drivers of change at policy level are the digital and the green transformation, quite aptly named the ‘twin transition’ as they will inevitably go hand-in-hand. But underneath these two main considerations are a vast number of individual measures regulating most aspects of everyday business, affecting product design, production processes, supply chains, the materials and substances being used, as well as the way in which data is managed.

It was (and is) readily acknowledged that the three sectors represented by this conference have a role to play in this transition, and the examples in terms of innovation and sustainability presented by the industry representatives (Sofia Svingby, Nudan Yücel, and Alexandre Lacour) during the plenary debate clearly demonstrated the seriousness with which that responsibility is being undertaken.

To guarantee a smooth transition, extensive exchanges between industry and policy makers will be required. It is crucial for our industry (and others) to be given a voice in shaping further legislation and its implementation. Policy measures need to undergo a ‘reality check’ before being implemented, and attention must be given to avoid smothering industry in overregulation – with the counterproductive effect of weakening competitiveness. Small and medium sized companies can easily get lost in the regulatory jungle and incur crippling costs trying to comply and adapt to new rules. This must therefore remain an important consideration.

In conclusion, the two key ‘take-aways’ from this shared conference are:

  •  The green and digital transition are the foundation for a competitive economy.
  • This transition, and the implementation of measures along the way, need to go hand-in-hand with industry.

The official aim of the EU’s industrial policy is to ensure European industry becomes more competitive as a driver of sustainable growth and employment. For this we need the EU, but for it to work, the EU needs us.

In this respect, the work we do at CEIR, Pneurop and Europump, our constant dialogue with policy makers, as well as strong alliances with stakeholders, are the foundation for our industries to strive and to grow. This event was a perfect demonstration of what needs to be done, and what can be done when we join forces.

Further information on the work carried out by Europump can be found through the website – https://europump.net/ – or for any specific inquiries, please email the Europump secretariat – secretariat@europump.org

Related Articles

Armstrong Celebrates 90th Anniversary

Armstrong Celebrates 90th Anniversary

Armstrong Fluid Technology marked its 90th anniversary this April, celebrating a significant milestone of longevity and innovation in the fluid-flow…

Related Whitepapers

How to Read a Pump Curve (and Why you Want to)

If you have ever worked with pumps before, be it in an installation, maintenance, or engineering capacity, chances are high you have seen a pump…

Design Optimization of Jet Fuel Pump for Aviation

Jet fuel pumps play a critical role in the safe and efficient operation of commercial aviation. The performance and reliability of these pumps directly impact…

The Cost Of Downtime In Manufacturing [Infographic]

Downtime can be the most expensive element of any manufacturing operation. Here are some important facts and tips you should know to cut down on…

AFT Fathom used to Model Central Heating Cycle of a State-of-the-art Combined Heat and Power Plant

Kerem Algüzey, design engineer at ENKA Insaat ve Sanayi A.S., used AFT Fathom to simulate the central heating cycle to inform the design of the…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *