Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

3 Things to Remember About Preventing VOC Leaks

Fluid Sealing
Teadit 3 Things to Remember About Preventing VOC Leaks

3 Things to Remember About Preventing VOC Leaks

By: Teadit

Gaskets and packing solutions play an important role in supporting sustainable industrial operations by reducing fugitive emissions from valves and flanged connections. By improving sealing performance and reducing the escape of volatile organic compounds (VOCs), facilities can improve environmental performance, protect personnel, and support long-term sustainability goals.

1. Proper sealing helps reduce VOC emissions

Valve packing is one of the first lines of defense against fugitive emissions from valves, while gaskets help control emissions from flanged connections. Proper packing selection is critical because it directly affects leakage performance. Low-emission packings can be tested and certified under recognized fugitive-emission standards, with some achieving leakage performance as low as 2 ppm under specified test conditions. In addition, several sealing solutions available today can reduce fugitive VOC emissions to well below 100 ppm, helping facilities improve compliance and reduce atmospheric releases.

Packing solutions such as TEADIT® 2848 or TEADIT® 2236 are designed to prevent the emission of VOCs, helping decrease the overall environmental impact of industrial processes.

2. Lower emissions improve safety and conserve resources

Reducing VOC emissions improves both workplace safety and operational efficiency. VOCs can be hazardous when inhaled or when personnel are exposed over time, so limiting these emissions helps lower health and safety risks for on-site teams. This reduction also plays an important role in minimizing industrial operations’ contribution to climate change.

Preventing VOC leaks also avoids the loss of valuable process media. When leaks occur, facilities lose not only the material itself, but also the energy used to produce, move, and process it. Sealing technologies such as TEADIT®‘s 913M spiral wound gaskets help contain these materials within the piping system, maximizing process efficiency, improving resource utilization, and reducing unnecessary waste.

3. Sustainability goes beyond emissions

Sustainability is not limited to air quality and fugitive emissions. It also includes water use, wastewater disposal, waste generation, packaging reduction, and the protection of land and biodiversity during production.

Facilities should evaluate water use in the production of sealing solutions and identify ways to reduce freshwater consumption. This may include recycling water or using alternatives such as rainwater or treated wastewater instead of freshwater. They should also consider how much waste is generated during production, how to reduce packaging, and how to avoid excess waste.

Another important factor is how nature, especially land, is affected by raw material sourcing. If fugitive emission solutions rely on minerals from the earth, manufacturers should consider whether alternative minerals could yield an equivalent product with lower environmental impact through less invasive mining or mineral-capture processes.

As the goal remains sealing for a safer and greener tomorrow, proactive manufacturers should continue to improve efficiency, reliability, and responsible production practices to reduce their environmental impact and support more sustainable industrial operations.

To read more about the importance of sealing VOCs, read the full article.

Image Credit: engineer — studio, stock.adobe.com.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…