Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Sulzer Announces MIXPAC™ MixCoat™ Flex Protective Coating Dispensing System

Chemical
Sulzer

Sulzer Announces MIXPAC™ MixCoat™ Flex Protective Coating Dispensing System

By: Sulzer

Sulzer Mixpac USA, Inc., the leading innovator of 2-component adhesive dispensing systems, announces the availability of MIXPAC™ MixCoat™ Flex, a member of the innovative MIXPAC™ MixCoat™ cartridge-based 2-component dispensing system family. MixCoat Flex is ideal for coating applications in areas with limited accessibility for standard spray equipment, like tanks and bilges in marine applications. It is also a good choice for stripe coating with a low pressure spray and for a variety of water/wastewater manhole applications.

With its robust design, the lightweight and mobile MixCoat Flex can be placed on the ground or mounted on a wall. It offers maximum flexibility to reach into tight and angled spaces. The new dual stage trigger provides one-handed operation and can accommodate a variety of spray applications. Use the 90 degree tip for spraying tight angles and the straight tip for broader areas. MixCoat Flex can adjust to 1:1, 2:1, 3:1 and 4:1 ratios into the same dispenser; simply exchange the plunger disc to change the ratio.

SulzerThe MixCoat Flex is available in both single flex line and dual flex line options. Use the single flex line hose for slower setting applications. For fast curing coatings, use MixCoat Flex with dual flex line to quickly apply and touch up smaller areas with minimal set up time and very little cleanup compared to expensive plural component spray equipment. The dual flex line can also be used with the MixCoat Hybrid Spray system for areas that are difficult to access. Offering comfortable handling for precise paint jobs, the hybrid design features separated hoses, making it suitable for material with a very short pot life.

For more information visit www.sulzer.com/mixcoat or call (603)-244-9733.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…