Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Pump Systems Optimization 3-Part webinar series

Industry News

Pump Systems Optimization 3-Part webinar series

Pump Systems Matter (PSM) and the Hydraulic Institute (HI) have announced the upcoming Pump Systems Optimization 3-Part webinar series. The series will begin on June 3, 2013. During this series participants will examine and identify opportunities for energy savings, learn how to increase profitability, and learn how to increase reliability in their pumping systems. Participants also earn 5 Professional Development Hour (PDH) credits from HI upon completion of the series.

The Pump Systems Optimization Webinar Series will consist of 3 modules; each module will contain internet-based pre-work training, and a live 1-hour webinar. The series schedule is below:

Module 1: System Optimization Webinar: June 3 @ 11:00am EDT

· Identify cost saving and energy efficiency opportunities

· System optimization opportunities

· Understand energy use of current systems in the market

· Understand energy use by system

· Understand energy use by Component

· Understand energy use by industry

Module 2: Screening & Analysis Webinar: June 10 @ 11:00am EDT

· Objectives of screening a system

· Screening data used in identifying priorities

· Identifying priorities

· End results of screening

· Objectives of analyzing a pump system

· Analysis tools

Module 3: Life Cycle Cost Analysis & Action Planning Webinar: June 17 @ 11:00am EDT

· Understand how to prove the benefits of a pump system optimization

· Implement system improvements, and measure their effects on life cycle costs

· Understand the PSM action plan

· Benefits of using an action plan

· Identify the steps of the action plan

When pump systems are not optimized for best efficiency, they drain profits with higher energy and maintenance costs, shorten mean time between repairs, and increase CO² emissions. Optimized pump systems are more energy efficient and reliable overall.

This webinar series is based on the Pump Systems Optimization: Energy Efficiency and Bottom-Line Savings course. The course has been taught to nearly 800 pump industry professionals resulting in significant dollars saved in not only energy costs but in reduced maintenance and down time as well.

Registration is available now through May 30, 2013. Secure your spot and register for the 3-part webinar series at www.PumpSystemsMatter.org/Webinars.

 

Related Articles

Related Whitepapers

Design Optimization of Jet Fuel Pump for Aviation

Jet fuel pumps play a critical role in the safe and efficient operation of commercial aviation. The performance and reliability of these pumps directly impact…

The Cost Of Downtime In Manufacturing [Infographic]

Downtime can be the most expensive element of any manufacturing operation. Here are some important facts and tips you should know to cut down on…

AFT Fathom used to Model Central Heating Cycle of a State-of-the-art Combined Heat and Power Plant

Kerem Algüzey, design engineer at ENKA Insaat ve Sanayi A.S., used AFT Fathom to simulate the central heating cycle to inform the design of the…

Driving Energy Savings a Commercial Facility Energy Upgrade Project

Upgrading to Design Envelope pumps helped GAC save energy costs of 20,000 AED in the first year. Armstrong’s Pump Manager service provides reports and notifications…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *