Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Pump Engineer Q&A with Eugene L. Broerman, Principal Engineer in the Fluid Machinery Systems Section at Southwest Research Institute in San Antonio, Texas

Industry News

Pump Engineer Q&A with Eugene L. Broerman, Principal Engineer in the Fluid Machinery Systems Section at Southwest Research Institute in San Antonio, Texas

Pump Engineer is pleased to present a discussion with Eugene L. Broerman, Principal Engineer in the Fluid Machinery Systems Section at Southwest Research Institute in San Antonio, Texas. Eugene will play a key role in the Pump Summit Americas conference, taking place on June 26th–27th, 2018, as he will not only moderate, but also present during one of the scheduled workshops.

Click here to Read the Q&A!

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…