Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PSM/HI Announce Free Webinar Series on Electronic Data Exchange for the Pump Industry

Industry News

PSM/HI Announce Free Webinar Series on Electronic Data Exchange for the Pump Industry

The Hydraulic Institute and Pump Systems Matter announce the kick-off a new webinar series on Electronic Data Exchange for the Pump Industry. Session 1: Getting Started with HI Electronic Data Exchange will take place on January 15, 2013 and Session 2: Demonstrating how Electronic Data Exchange Works will take place on January 22, 2013. Both sessions will begin at 1:00pm EST and last approximately one hour each. Registration links for the free sessions are available atwww.PumpSystemsMatter.org.

The Hydraulic Institute developed HI 50.7—2010,“Standard for Electronic Data Exchange for Pumping Equipment.”This standard builds upon the FIATECH project known as the Automating Equipment Information Exchange (AEX) and is one of the components you must have to improve interoperability when bidding, quoting, and purchasing pumping equipment for capital facilities

Session 1 will cover justifications for implementing HI-EDE, the scope and purpose of the HI-EDE 50.7 standard, how data is exchanged using HI-EDE, benefits of implementing HI-EDE in your organization, and steps to take to implement HI-EDE.

Session 2 will cover the type of data used to define the HI-EDE 50.7 Standard, describe EDE compliance levels, and explain how EDE was successfully tested for software capabilities. The webinar will also cover XML, data transfer, and pump process design.

Advance registration is required. To register, visit www.PumpSystemsMatter.org.

Pump Systems Matter is a non-profit educational organization established by the Hydraulic Institute, and leading utilities and energy efficiency organizations, to educate the industry on the benefits to pump systems optimization and energy efficiency to improve bottom-line savings of end-user companies. For more information visit: www.PumpSystemsMatter.org.

About the Hydraulic Institute: The Mission of the Hydraulic Institute is to serve the pump industry as a forum for the exchange of information while providing value-added services to member companies and pump users worldwide. This includes the development and delivery of comprehensive industry standards. For more information on the Hydraulic Institute, its member companies and its Standards Partners, visit www.Pumps.org.

Related Articles

Related Whitepapers

Climate Control and Extra Cargo Space: a Commercial Facility Case Study

The Armstrong Design Assist service reduced the required floor space for hvac equipment. The ipc 11550, delivered as part of a packaged system, automates the…

Upside Down Condos [Case Study]

This condo tower (324 units on 13 floors) had completed a previous retrofit that unfortunately left the variable speed pumps operating in a fixed mode…

Ras Al Khaimah saves 20% energy and 12% OPEX in wastewater pumping system

RAKWA is the RAK wastewater agency responsible for designing, building, operating, and maintaining all the public wastewater systems. Ras Al Khaimah—known as RAK—is the northernmost…

Intelligent Pumps Exceed Savings Estimates (Commercial Facility Installation Casestudy)

Design Envelope 6800 boosters reduced energy consumption by 76% compared to previous boosters, resulting in annual cost savings of $4,400 per system. Background The Heron’s…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *