Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Blackmer® Releases GNX & GNXH Series Pumps

Industry News

Blackmer® Releases GNX & GNXH Series Pumps

Blackmer®, part of PSG®, a Dover company and a global leader in positive displacement, regenerative turbine and centrifugal pump, and reciprocating compressor technologies, is pleased to announce the availability of its new GNX and GNXH Series Sliding Vane Pumps. The market’s only alignment free reduced speed positive displacement pumps, Blackmer GNX and GNXH Series pumps are designed to handle a wide range of non-corrosive, non-abrasive industrial liquids and petroleum products.

Manufactured with a larger operating range than competitive designs, Blackmer GNX and GNXH Series pumps offer higher flows and higher pressure. These pumps are available with a robust, commercial-grade gear reducer with more operating speeds that allows for precise flow selections. GNX and GNXH Series pumps are self-priming, and the self-adjusting vanes help maintain this capability. In addition, they are the only alignment-free pumps that can dry run without damage during self-priming and line stripping.

These pumps are currently available in 2- and 2.5-inch flanged port sizes. Larger 3- and 4-inch flanged port sizes will be released later this year. Combined, these sizes provide flow capacities ranging from 20 to 500 gpm (76-1,893 L/min) at working pressures up to 175 psi (12.1 bar). Both 90 degree and 180 degree porting are standard. GNX and GNXH Series pumps are suited for both portable and stationary applications. Typical applications include fuel oils, lube oils, jet fuels, gasoline, edible oils and a variety of solvents and thinners.

For more information on Blackmer, please go to blackmer.com. Blackmer is a product brand within PSG®, a Dover company. For more information on PSG, please go to psgdover.com.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…