Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

New Cost-Effective Electric Actuator Models From Hayward Flow Control

Industry News

New Cost-Effective Electric Actuator Models From Hayward Flow Control

Hayward Flow Control announces the addition of their new EPM-4 and EPM-6 models to their EPM Series of quarter-turn reversing electric actuators. The EPM-4 and EPM-6 are designed to eliminate wiring errors, increase reliability, and provide simplicity during installation. They can be either factory or field mounted on any Hayward ball or butterfly valve. Additionally, like other EPM Series electric actuators, they can be fitted to most other manufacturers’ ball or butterfly valves.

The EPM-4 provides a torque output of 455 in-lb./ 50 Nm, and the EPM-6 an output of 600 in-lb./67 Nm. Both models feature a robust gear train design and modular construction, as well as a NEMA 4/4X enclosure. Position indicators and clutchless manual override are standard.

Additional Key Features Include:

v Aluminum Alloy Dry Powder Coated Housing

v Internal Low Power Heater

v 4 Limit Switches (2 Auxiliary)

v ISO5211 F07 Mounting Pattern

v Data Logging and Diagnostics (Proportional Control Only) for EPM-6

v CSA Listed

Options for the EPM-4 and EPM-6 include positioners, extended duty motors, feedback potentiometer, and local control stations. Both models are available with alternative voltages of 24 VAC/DC and 230 VAC. The EPM-4 allows for 12 VAC/DC as well.

Typical applications or installations include but not limited to waste and water treatment, chemical processing, food and beverage, pharmaceutical, pulp and paper, irrigation/ agriculture, marine or corrosive environments, aquatics, and water / theme parks.

About Hayward Flow Control

 Hayward Flow Control, a division of Hayward Industries, is a leading manufacturer of industrial thermoplastic valves, filters, strainers, actuation and pumps for use in water & wastewater treatment, chemical processing, water parks / municipal pools, life sciences, and general processing. Hayward’s thermoplastic flow control products can accommodate aggressive & corrosive environments, delicate ecosystems, or the strictest chemical balances to keep water & life working together. Hayward Flow Control is an ISO 9001:2008 Certified manufacturer.

For more information, contact Hayward Flow Control at 1.888.429.4635 or by e-mail at hflow@haywardnet.com. Visit us also atwww.haywardflowcontrol.com

Related Articles

Related Whitepapers

True-turbine Design Enhances Energy Recovery and CO2 Reduction

In the oil and gas industry, hydraulic power recovery turbines (HPRTs) capture energy in hydrocrackers that would otherwise be wasted to efficiently drive a charge…

5 Steps for Reliable Packing Performance

These guidelines will help extend packing life and reduce downtime. No shortcuts should be taken if a plant wants to achieve reliable compression packing performance.…

Pressure Testing of DFT® Check Valves [Infographic]

All DFT Check Valves undergo rigorous tests to ensure they meet industry quality requirements. Check out this handy infographic to learn about their diligent testing.

Bearing Protection Best Practices

Electro Static Technology (EST, AEGIS®) guarantees that AC induction motor bearings will not fail from electrical fluting damage when AEGIS Shaft Grounding Rings have been…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact