Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NETZSCH to showcase its advanced pumping technology at ILTA 2022

Industry News
NETZSCH to showcase its advanced pumping technology at ILTA 2022

NETZSCH to showcase its advanced pumping technology at ILTA 2022

By: Netzsch

Visit Booth #769 to learn about highly efficient, advanced pumping technology for liquid terminal and liquid transportation applications

NETZSCH Pumps North America, LLC will be showcasing its extensive line of advanced, field-proven pumps for demanding liquid terminal applications at the International Liquid Terminals Association 2022 Annual Operating Conference and Trade Show, June 13-15 in Houston, TX. Stop by booth 769 to see NOTOS® Multiple Screw Pumps, TORNADO® T2 Rotary Lobe Pumps, NEMO® Progressing Cavity Pumps, and NETZSCH’s pumping solutions for liquids of widely different viscosities.

NOTOS® 2NS Two Screw Pumps are particularly suitable for non-abrasive to slightly abrasive, corrosive as well as non-corrosive and low to highly lubricating liquids. These pumps have proven themselves for low to high flow rates as well as pressures. Due to their characteristics, the NOTOS® 2NS self-priming pumps have a long service life making them ideal in tank farms.

The compact TORNADO® T2 Rotary Lobe Pump, a self-priming, valve-less pump that offers maximum operational performance, high reliability and durability, ease of maintenance, and a low total life cycle cost. With a revolutionary design that has been recently reengineered to maximize uptime, the TORNADO® T2 pump features metal lobes running inside a metal housing with an elastomer liner.

Another option for liquid terminal and liquid transportation is the NEMO® Progressing Cavity Pump, known for its continuous, pressure-stable, gentle and low-pulsation conveyance of almost any fluid without being affected by fluctuations in pressure and viscosity.

NETZSCH pumps are available with a wide range of flow and pressure capabilities. The pump and tank can be constructed from carbon steel, stainless steel, galvanized steel, and Halar/rubber-lined steel, depending on application needs.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…