Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

New suspended pumps with the hydraulic system of standardized chemical pumps / ACHEMA 2018

Chemical
KSB

New suspended pumps with the hydraulic system of standardized chemical pumps / ACHEMA 2018

By: KSB

The Estigia type series extends the KSB SE & Co. KGaA, Frankenthal, product portfolio for the chemical and petrochemical industries and other applications. It will be showcased at this year’s ACHEMA trade fair in Frankfurt (11 to 15 June).

The low-pressure suspended pumps are designed for vertical wet installation in a closed tank under atmospheric pressure. For the installation depth, various lengths ranging from a minimum of 852 mm to a maximum of 6402 mm are available and three discharge pipe diameters can be selected for each pump size.

Given the vertical design, the pumps only require very little space. When the immersion depth exceeds 2400 mm, a special design element between the support column sections and the discharge pipe makes for significantly reduced vibrations. The casing cover of the pump is fitted with a product-lubricated plain bearing made of high-grade, wear-resistant silicon carbide. This results in a long service life and long maintenance intervals.

The pump set is easy to install and dismantle with its integrated cover plate serving as the tank cover. The material variants on offer are cast iron, stainless steel and duplex steel. Replaceable casing wear rings prevent possible wear on casing and impeller. The Estigia type series is characterised by a high efficiency and low operating costs.

The pump set can be supplied with shaft bearings lubricated by the fluid handled, an external liquid or an electric grease pump. A so-called cantilever design is also available. This version is designed to ISO 5199, with flexible coupling and grease-lubricated rolling element bearings arranged outside the fluid handled. The pump is suitable for fluid temperatures of -30 °C to +100 °C. It can be driven by variable speed and fixed speed electric motors, with or without ATEX approval.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…