Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Hydraulic Institute Wastewater Pumps Webinar Series Offers In-Depth Instruction on Selection of Pumps Used in Typical Aerobic Wastewater Treatment Plants

Industry News
Hydraulic Institute Wastewater Webinar

Hydraulic Institute Wastewater Pumps Webinar Series Offers In-Depth Instruction on Selection of Pumps Used in Typical Aerobic Wastewater Treatment Plants

The Hydraulic Institute (HI) offers a three-part Wastewater Pump Webinar series starting on April 23rd that offers a detailed overview on treatment plants and pumps, pump requirements for plant operators, and pump accessories.
This live course, developed and certified by HI, will assist engineers in understanding how to recommend the best pump type for each wastewater application.  Attendees will become familiar with the industry-accepted pump application guidelines for sludge transfer and dewatering, chemical feed, sampling and plant water systems and learn about the different wastewater treatment processes.
“Using skills and knowledge gained through the Wastewater Pumps Webinar series, companies and utilities can take the first steps to improve uptime and lower maintenance costs associated with pumps and pumping systems,” notes Mark Sullivan, Director, Education and Marketing, Hydraulic Institute.
The Wastewater Treatment Webinar Series will be conducted on April 23, April 30 and May 7th.  Each session begins at 1pm ET and lasts approximately one hour followed by a live Q&A session. Registration is $259 with HI members receiving a 25% discount.  To register, visit http://estore.pumps.org/New-Wastewater-Pumps-3-Part-Webinar-Series-P763.aspx.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…