Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Hydraulic Institute Announces 2012 Mechanical Seals Webinar Series

Industry News

Hydraulic Institute Announces 2012 Mechanical Seals Webinar Series

The Hydraulic Institute (HI), in collaboration with the Fluid Sealing Association (FSA), has announced the kick-off of the 2012 Mechanical Seals Webinar Series.  The series will begin on Thursday, March 29, 2012. A free supplemental webinar on sealing systems energy efficiency will be held on March 15, 2012.

Participants will be led by and have access to industry-leading experts in a non-commercial educational forum.  HI technical webinar participants can receive up to four professional development hours.  PDH credits are offered after completion of each live webinar.

The following is a schedule for the 2012 Mechanical Seals Webinar Series:

Section 1: Thursday, March 29, 1:00-2:00 EDT – Mechanical Seals – Types and Operating Principles
Presenter: Eric Vanhie, EagleBurgmann

Section 1 explains how a mechanical seal works and gives an overview of the most common seal types.  The objectives are to give the student a good understanding of how leakage, friction and wear of the materials interact and why many different seal types are used in pumps, agitators and compressors.

Section 2: Thursday, April 12, 1:00-2:00pm EDT – Mechanical Seals Construction and Design.

Presenter: Mike Huebner, Flowserve

Section 2 will cover different design features used in common seals.  This section will explain the strengths and weaknesses of various design options and impact of design features on seal performance.  Mike will discuss seal faces, springs, seal glands, and much more.

Section 3: Thursday, April 26, 1:00-2:00pm EDT – Mechanical Seals – Installation, Connections — Commissioning

Presenter: Eric Boyce, John Crane

Section 3 will cover mechanical seals used in rotary equipment, basic preparation and standards as well as support system piping plans promoting longer seal life and more.

Section 4: Friday, May 11, 1:00-2:00pm EDT – Mechanical Seals – Seal Environment and Failure Analysis.
Presenter: Henri Azibert, A.W. Chesterton Company

Section 4 covers how to improve material selection, installation and operating procedures, environmental controls, seal design and much more.

To register for the 2012 Mechanical Seals Webinar Series, visit the webinar section on the HI eStore. To register for the free supplemental webinar on March 15, 2012 visit the HI and PSM Webex platform.  You can register for the entire series or for individual sessions.  Registration for the series is $295. Individual sessions are $100 each.

Related Articles

Related Whitepapers

Hydra-Cell® Fluid Handling Capability

Handles Abrasives and Low-to-High Viscosity Fluids From drinking water to highly viscous cutting fluids, Hydra-Cell pumps handle the full spectrum of process fluids while maintaining…

Setting The Standard Of Excellence

Whether your application requires a 250 horsepower motor, a 30,000 horsepower motor, or anything in between, look to World Series® motors for the utmost in…

Improved Method of Estimating Steam Hammer Loads

Recent research has shown that a commonly used method to estimate transient pipe forces does not reliably yield conservative predictions. As the topic of transient…

Discharge Recirculation

Discharge recirculation occurs when a pump is operating significantly away from its best efficiency point (BEP). The BEP is the operating point at which the…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact