Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Hydra-Cell / Wanner Engineering Diaphragm Protection: Advanced Diaphragm Position Control (ADPC) Technology

Pumps & Operations
Hydra-Cell® Diaphragm Protection Advanced Diaphragm Position Control (ADPC) Technology

Hydra-Cell / Wanner Engineering Diaphragm Protection: Advanced Diaphragm Position Control (ADPC) Technology

All Hydra-Cell pumps feature a diaphragm protection system to safeguard the diaphragms against abnormal or adverse conditions. Most Hydra-Cell models feature the patented Kel-Cell® or new Advanced Diaphragm Position Control (ADPC) technology. Others use an exclusive underfill/overfill valve system. They are designed to protect against:

  • Partially or completely blocked inlet pipe or inlet filter.
  • Partly or completely closed inlet shut-off valve.
  • Inadequate liquid supply.
  • Excessively viscous fluids.
  • Inadequate discharge pressure.
  • Other conditions that result in excessive vacuum formed at the inlet of the pump.
Hydra-Cell® Diaphragm Protection Advanced Diaphragm Position Control (ADPC) Technology

Diaphragm positioning systems protect diaphragms on most Hydra-Cell models.

These conditions can result from system problems, poor system design, faulty installation, an unplanned operational incident, or other situations that would cause the diaphragms to operate out of hydraulic balance and ultimately deform and rupture.

Hydra-Cell® Diaphragm Protection Advanced Diaphragm Position Control (ADPC) Technology

Hydra-Cell Metering Solutions model MT8 is one of the Hydra-Cell pumps to feature the underfill/overfill valve system.

Kel-Cell and ADPC positioning systems stabilize the diaphragms in all such conditions and virtually eliminate the possibility of an incidental diaphragm failure caused by adverse conditions.

The underfill/overfill valve ensures optimum actuating oil on every stroke for continuous accuracy and protection of the pump and diaphragm.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…