Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Grundfos Talks With Top Water Professional

Grundfos

Grundfos Talks With Top Water Professional

By: Grundfos

Tom Drew, Grundfos Global Business Development Manager talks to Dave Fisch, one of the top water professionals in Northern California. Dave is the owner of Fisch Drilling and Pumps and has been in the drilling and pumps industry for over 40 years. Dave discusses why using Grundfos pumps are important not only to his business, but for his customers as well.

Dave had a customer whose pumps went out; he suggested the customer use the SQ/SQE Grundfos pump because of its wide range of operating voltage. It has a soft start which is easier on the battery backup systems, it has a permanent magnet high efficiency motor and has low operating costs. All these variables made the SQ/SQE the perfect pump for this customer.

Dave loves Grundfos products because they are always ahead of the curve, and he can always rely on good products from Grundfos.

Grundfos SQ 3-inch submersible pump covers all residential groundwater needs. Several built-in protection features and soft start to reduce stress on pump and electrical service.
https://product-selection.grundfos.co…

Thanks to the built-in variable speed drive, SQE delivers constant water pressure regardless of the number of opened taps. This increases homeowner comfort. The SQE submersible groundwater pump is one of the most advanced submersible pump solutions for domestic applications.
https://product-selection.grundfos.co…

Grundfos has 5 NEW SQFlex models available! The Grundfos SQFlex AC/DC-powered submersible pump range now includes high-speed models to facilitate even better coverage of your solar-powered water pumping needs.
https://product-selection.grundfos.co…

For more information contact your local Grundfos representative.
https://www.grundfos.com/us/where-to-buy

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…