Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

GIW Introduces Patented Heavy Duty Centrifugal Slurry Pumps, Hydrocyclone

Industry News

GIW Introduces Patented Heavy Duty Centrifugal Slurry Pumps, Hydrocyclone

By: KSB

GIW Industries, the leader in the design, manufacture, and application of heavy duty, centrifugal slurry pumps, has announced a groundbreaking new hydrocyclone design that reduces rebuild time by as much as 75 percent.

The GIW Hydrocyclone, covered by more than 20 U.S. and global patents, has significantly longer wear life and shorter maintenance times than traditional hydrocyclones. As a result, customers enjoy less downtime, less expense, and less frustration than ever before. 

Fresh, innovative design reduces downtime by up to six hours
Most hydrocyclone manufacturers are basically producing the same designs that they have been using for the past 50 years. In contrast, the GIW Hydrocyclone is the result of a fresh, original look at mining-processing needs and modern technology.

GIW’s straightforward tie-bolt and clamp design is a breeze to install and maintain. Seven fasteners are all that is needed for a complete rebuild. A twist-to-lock option simplifies apex removal and service, and drop-in, glue-free liners reduce build time. By adding weep holes for early wear detection, customers can virtually eliminate unplanned outages.

“We offer a lot of features that no one else can,” says Mark Davis, GIW Mill Products Manager. “An unplanned outage can cost anywhere from $50,000 to $150,000 per hour in terms of lost production, labor, and other overhead. We offer a longer wear life, and our cyclone takes a quarter of the time to rebuild, when compared with competitors’ cyclones.”

That equals a typical rebuild time of just two hours — a time savings of up to six hours and a potential financial savings of hundreds of thousands of dollars.

Long-lasting construction extends life in high-wear environments
Manufactured in the U.S., the GIW Hydrocyclone is made for high-wear environments. Aside from its simple installation and fast, easy maintenance, this hydrocyclone is built to last. Tongue-and-groove mating surfaces foster precision alignment. Long-lasting urethane and ceramic cones and powder-coated steel construction resist corrosion and damage from abrasion, acid, oil, hydrocarbon, phosphate, potash, and high temperatures, increasing the life of the product.

This hydrocyclone has superior resistance to tramp and oversize materials, thanks to its reaction bonded silicon carbide (RBSiC) and polyurethane construction. The patented design makes the GIW Hydrocyclone perfect for use in primary ball mill, aggregate, tailings, regrind, coal-preparation, dewatering, and phosphate/potash processes.

The GIW Hydrocyclone is available in eight sizes, ranging from 2.5 inches to 33 inches. Repairs and rebuilds can be performed in place or on a build stand.

“The cyclone market is ready for better products,” Davis says. The GIW Hydrocyclone is ready to meet that demand. For more information about the GIW Hydrocyclone, email us at marketing@giwindustries.com.

About GIW Industries
GIW Industries began as a small foundry and machine shop in Augusta, Ga., in 1891. In 1914, GIW began building slurry pumps. Today, the company comprises two manufacturing facilities, one in Grovetown, Ga., and the other in Thomson, Ga. These foundries and machine shops are used for manufacturing and assembling pumps and for casting a variety of abrasion-resistant alloys and urethane elastomers. As a subsidiary of KSB AG of Germany, a global pump and valve manufacturer, GIW has the infrastructure to supply pumps worldwide. KSB has presence in 100 countries with sales organizations, offices, and 30 manufacturing sites.

Related Articles

Related Whitepapers

Design Optimization of Jet Fuel Pump for Aviation

Jet fuel pumps play a critical role in the safe and efficient operation of commercial aviation. The performance and reliability of these pumps directly impact…

The Cost Of Downtime In Manufacturing [Infographic]

Downtime can be the most expensive element of any manufacturing operation. Here are some important facts and tips you should know to cut down on…

AFT Fathom used to Model Central Heating Cycle of a State-of-the-art Combined Heat and Power Plant

Kerem Algüzey, design engineer at ENKA Insaat ve Sanayi A.S., used AFT Fathom to simulate the central heating cycle to inform the design of the…

Driving Energy Savings a Commercial Facility Energy Upgrade Project

Upgrading to Design Envelope pumps helped GAC save energy costs of 20,000 AED in the first year. Armstrong’s Pump Manager service provides reports and notifications…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *