Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

How to Select the Correct Gasket [Webinar]

Industry News
Fluid Sealing Association Webinar How to Select the Correct Gasket

How to Select the Correct Gasket [Webinar]

The Fluid Sealing Association just announced a training webinar!
“How to Select the Correct Gasket”
Friday, December 9, 2016 at 2:00 PM EST
One of the most critical yet overlooked aspects to successful flange sealing is selecting the correct gasket.  Due to an aging workforce and lack of shared sealing knowledge, more focus is needed to be put on selecting the proper gasket. Industry records show that 1 in every 5 gasket failures indicates improper gasket style or material was used. The Fluid Sealing Association (FSA) is a manufacturer-based resource whose charter is educating industry including the correct selection of gasketing to ensure a safe and sound connection.
This 1.5 hour webinar will give vital information, including the following subjects:
–        Forces acting on a bolted connection
–        Types of gaskets by categories (metallic, semi-metallic, and non-metallic)
–        Selection of gasket for applications
            o   Gasket related considerations
            o   Flange related considerations
            o   Fastener considerations
            o   Joint considerations

The Speakers:

Ron Frisard, Vice Chair of Gasket Division, Fluid Sealing Association

Chett Norton, Technical Chair of Gasket Division, Fluid Sealing Association

The interactive webinar will take place live on December 9.  The cost is $50.  If you cannot make the live version, we will have a recorded version on the FSA website, www.fluidsealing.com, to view on demand at a later date.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…