Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Fluid Dynamics to Display dynaBLEND Liquid Polymer System at WEF Residuals and BioSolids 2013

Industry News

Fluid Dynamics to Display dynaBLEND Liquid Polymer System at WEF Residuals and BioSolids 2013

Fluid Dynamics, a leading manufacturer of liquid and dry polymer blending systems and a division of Neptune Chemical Pump Co., is pleased to announce that it will be showcasing its dynaBlend Liquid Polymer Dilution/Feed System at the 27th Annual WEF Residuals and BioSolids Conference. Sponsored by the Water Environment Federation in cooperation with the Kentucky-Tennessee Water Association, the conference is being held May 5-8 at the Nashville Convention Center in Nashville, TN, USA.

The dynaBLEND Liquid Polymer Dilution/Feed System eases the task of blending liquid polymers for wastewater processes because it is designed to effectively activate all types of liquid polymers. Its non-mechanical mixing chamber delivers an unequalled degree of reliability when compared to competitive technologies. The dynaBLEND system also features an injection check valve designed for easy disassembly and inspection. The injection check valve eliminates many of the maintenance concerns that affect other systems.

In 1993, the Environmental Protection Agency (EPA) issued the 40 CFR Part 503 Biosolids Regulation describing the beneficial use of residuals and biosolids as sustainable natural resources. At WEF Residuals and Biosolids Conference, attendees will explore the development, implementation, operation and maintenance of residuals and biosolids management.

For more information on Fluid Dynamics and its dynaBLEND Liquid or Dry Polymer Dilution / Feed System, please visitwww.fluiddynamics1.com, or email us at info@dynablend.com. Fluid Dynamics is a division of Neptune Chemical Pump, an operating company within Pump Solutions Group (PSG®). For more information on PSG, please go to www.psgdover.com.

Related Articles

Related Whitepapers

Specification Tips to Maximize Heat Transfer: Plate and Frame Exchangers

Choosing the right plate and frame heat exchanger for your application Heat exchangers are widely used in various industries including chemical, oil & gas, power…

Selecting Pump Upgrades and Operating Modifications for Existing Chilled Water System

Problem Natraj Arjunan, engineer at L&T Technology Services in Chennai India, was tasked with reviewing and simulating an existing chilled water system to diagnose system…

All-New Hydraulic Design of an Electrical Automotive Coolant Pump

CFturbo presentation at ISimT-24 in Munich/Germany! The paper “All-new Pump Design of an Electric Automotive Coolant Pump” describes a joint development between TENGAM Engineering and…

How to Read a Pump Curve (and Why you Want to)

If you have ever worked with pumps before, be it in an installation, maintenance, or engineering capacity, chances are high you have seen a pump…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *