Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Check Valve Solution For A Copper Mine

DFT Valves
DFT Check Valve Solution For A Copper Mine

Check Valve Solution For A Copper Mine

By: DFT Inc.

Facility: Copper Mine in Arizona, United States of America

Application Problem: Solvent Extraction & Electrowinning – Mine Dewatering and Water Hammer

Solution: DFT® Model ALC® Wafer Check Valve, RF-Flanged GLC®, & Excalibur®

Success Since: 2015

Challenge: An Arizona Copper Mine using SXEW (Solvent Extraction & Electrowinning ) was looking to prevent instances of reverse flow, water hammer and failing valves.

SXEW is a two-stage hydro metallurgical process that first extracts & upgrades copper ions from low grade leach solutions into a solvent containing a chemical that selectively reacts with and binds the copper in the solvent.

Additionally, options were being sought to reduce water hammer during Mine Dewatering which is the lowering of the water table near quarries, mines, or other extraction sites. Mine dewatering removes water using specialized pumps that are constantly in use.

This process optimizes mine production and stabilizes mine walls during extractions, and silent check valves help support the entire application, while also reducing or eliminating water hammer.

Solution: Several DFT® Silent Check Valves were chosen as solutions for use in Mine Dewatering and SXEW to prevent reverse flow and water hammer.

The long life and tight shutoff make them a popular choice, as the costs of “change outs” or failures is substantial.

DFT Check Valve Solution For A Copper MineDFT® Model ALC® Features:

  • 2” to 24” line size
  • ASME class 150 and 300
  • RF wafer ends
  • API 594 face-to-face dimensions
  • Tight shutoff-lapped disc & seat
  • Stainless steel seat, disc & bushing
  • Horizontal or vertical installation

DFT Check Valve Solution For A Copper MineDFT® Model GLC® Features:

  • 2” to 42” line size*
  • ASME class 150 to 2500
  • RF & RTJ flanged ends
  • “Short” face-to-face dimensions
  • Stainless steel trim
  • Center-guided/dual-guided stem
  • Spring assisted silent closing, non-slam
  • Tight shutoff – lapped disc & seat
  • Horizontal or vertical installation

DFT Check Valve Solution For A Copper MineDFT® Model Excalibur® Features:

  • 2” to 24” line size*
  • ASME class 150 to 1500
  • RF & RTJ flanged ends, butt weld ends
  • ASME B16.10 face-to-face dimensions
  • Stainless steel trim
  • Center-guided/dual-guided stem
  • Spring assisted silent closing, non-slam
  • Tight shutoff – lapped disc & seat
  • Two-piece body
  • Horizontal or vertical installation
    *For larger sizes contact DFT

For more information on Industry success stories, click here.

Related Articles

Chemical Processing Industry Valves

In the chemical processing industry, equipment is often subjected to wide temperature fluctuations, high pressure, and corrosive chemicals. Maintaining control…

Related Whitepapers

Design Optimization of Jet Fuel Pump for Aviation

Jet fuel pumps play a critical role in the safe and efficient operation of commercial aviation. The performance and reliability of these pumps directly impact…

The Cost Of Downtime In Manufacturing [Infographic]

Downtime can be the most expensive element of any manufacturing operation. Here are some important facts and tips you should know to cut down on…

AFT Fathom used to Model Central Heating Cycle of a State-of-the-art Combined Heat and Power Plant

Kerem Algüzey, design engineer at ENKA Insaat ve Sanayi A.S., used AFT Fathom to simulate the central heating cycle to inform the design of the…

Driving Energy Savings a Commercial Facility Energy Upgrade Project

Upgrading to Design Envelope pumps helped GAC save energy costs of 20,000 AED in the first year. Armstrong’s Pump Manager service provides reports and notifications…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *