Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Increase Uptime And Efficiency In Your Conveyor With Predictive And Condition-based Maintenance

Danfoss

Increase Uptime And Efficiency In Your Conveyor With Predictive And Condition-based Maintenance

By: Danfoss

Danfoss intelligent drives in combination with existing sensors and edge intelligence can increase production line uptime. Intelligent drives can use inputs from external sensors, such as vibration sensors. This data is correlated with internal variables, including operating speed or load. The drive performs condition monitoring of equipment in service and provides early warnings in case degradation of performance is detected. Notification can be provided through the on-premises control system or a cloud solution.

On a production line conveyor, sensors measure vibration levels. Vibration levels that are to high could mean that a mechanical component is wearing out, leading to unscheduled downtime. The intelligent drive combines input form external sensors with internal data. It analyzes real-time data on the edge to detect changes, transmit early warnings, and identify deterioration issues. The drive will adjust the motor torque to protect the conveyor and optimize performance. It also sends a warning to the operator to add the conveyor to the maintenance schedule. Data is securely stored in the cloud, on-premises, and local data storage or in an automation system for further analysis.

Danfoss intelligent drives. Unleash the intelligence from within.

Learn more about Danfoss’s intelligent drives!

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…