Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Machinery Vibration Solutions

Industry News

Machinery Vibration Solutions

CEC Vibration Products Inc. (CEC) is a manufacturer of vibration sensors and condition monitoring equipment specialized for use in harsh environment applications. CEC provides a full line of self-generating velocity sensors, force sensors, industrial and high temperature accelerometers, digital switches, transmitters, signal conditioners, cables assemblies and more to measure, monitor and provide critical machinery feedback of machinery health.

Our line of Pump Protection products include:

4-160 Industrial Accelerometers: These accelerometers are intended to satisfy the general requirements for a low cost vibration sensor for use in multi-point experimental or light industrial vibration monitoring applications. These accelerometers feature a two-wire current loop operating principle which permits very long interconnecting cables to be used where necessary and at minimum expense since standard screened pair (or multi-pair) cables may be used.

1-808 Vibration Transmitter: The 1-808 is designed for the industrial environment where machine monitoring is important and space is at a premium. Each 1-808 Vibration Transmitter includes a high-pass and low-pass filter and the transmitters are configured to the customer’s specification at the CEC factory. By providing a calibrated 4-20 mA output signal, the 1-808 Vibration Transmitter is ideal for use with PLC’s, DCS’s, remote displays, or other electronic systems.

1-809 Vibration Transmitter: The 1-809 is a single channel Vibration Monitor designed to measure and protect critical machinery. The machinery vibration level is displayed on a 4-digit LED display. The reading can be displayed in inches per second (ips) velocity, g’s acceleration, or mils displacement. A 4-20 mA output signal is provided proportional to a pre-determined vibration level. Two alarms are provided for early warning or machine shutdown due to excessive vibration.

1-895 Digital Vibration Switch: The 1-895 is a versatile multi-purpose vibration switch. It features a built-in accelerometer and solid state electronics. The 1-895 is available in a variety of ranges. The 1-895 constantly monitors the vibration levels on critical machinery and provides timely feedback in the event of machine breakdown.

CEC Vibration Products – Pump Protection You Can Trust

www.cecvp.com

Related Articles

Related Whitepapers

Specification Tips to Maximize Heat Transfer: Plate and Frame Exchangers

Choosing the right plate and frame heat exchanger for your application Heat exchangers are widely used in various industries including chemical, oil & gas, power…

Selecting Pump Upgrades and Operating Modifications for Existing Chilled Water System

Problem Natraj Arjunan, engineer at L&T Technology Services in Chennai India, was tasked with reviewing and simulating an existing chilled water system to diagnose system…

All-New Hydraulic Design of an Electrical Automotive Coolant Pump

CFturbo presentation at ISimT-24 in Munich/Germany! The paper “All-new Pump Design of an Electric Automotive Coolant Pump” describes a joint development between TENGAM Engineering and…

How to Read a Pump Curve (and Why you Want to)

If you have ever worked with pumps before, be it in an installation, maintenance, or engineering capacity, chances are high you have seen a pump…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *