Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Geared Motors Solution For Pizza Packaging Line Conveyors

Food & Beverage

Geared Motors Solution For Pizza Packaging Line Conveyors

The Italian plant of one of the world’s largest food and beverage companies needed a reliable, efficient drive for a pizza packaging line. The shrink wrapping machine use drives to power the infeed conveyors. Traditional, stainless steel motors rated at 70-80 Hz had been used at the facility. To boost production the speed was increased to 80-90 Hz which created excessive heat causing the drives to fail.

After a careful analysis of the conveyor application demands, Bauer engineers recommended a BK Series right angle bevel geared motor for improved efficiency compared to worm gear solutions. The Model BK06 supplied features a PMSM (permanent magnet synchronous motor) that reduces heat losses from the rotor by 100% and total losses by approximately 25%, while increasing total efficiency by 10% or more. This improved performance translates into a lower total cost of ownership, a reduction in CO2 emissions, and ongoing savings that buffer against future increases in energy costs.

Because PMSM motors provide efficiency at a wide range of speeds, it allowed the conveyor line speed to be adjusted up to 80 RPM when needed to meet production schedule targets.

Compact Bauer BK Series models are completely enclosed and sealed against dust and moisture. A hardened wear sleeve and spray ring ensure leak-free performance.

Altra Motion Bauer BK Series Geared Motors

  • BK Series helical bevel geared motors
  • Hardened wear sleeve and spray ring ensure leak-free performance
  • Complies with NA and International standards, including NEMA, IEC, CSA, and CE
  • Low-noise gearing
  • IP65 Enclosure (Standard), IP66 (Optional)
  • Corrosion protection CORO1, CORO2, CORO3
  • Connection Standard with CAGE CLAMP®
  • Completely enclosed, sealed against dust and moisture

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…