Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Almatec ® to Feature BIOCOR Series Pumps at INTERPHEX 2016

Chemical
Almatec Biocor at INTERPHEX

Almatec ® to Feature BIOCOR Series Pumps at INTERPHEX 2016

Almatec®, part of PSG®, a Dover company and premier manufacturer of sanitary air-operated double-diaphragm (AODD) pumps, is pleased to announce that it will be featuring its BIOCOR Series pumps for sterile applications in Booth No. 2253 at the upcoming INTERPHEX 2016. The INTERPHEX event brings together a wide variety of leaders from the pharmaceutical and biotech industries and will be held at the Jacob K. Javits Convention Center in New York, NY, USA, from April 26-28.

Almatec BIOCOR Series pumps have been specifically designed for critical biologic fluid transfer applications and meet the strict standards, regulations and operational requirements that govern the biopharmaceutical industry. Featuring a 316L polished stainless steel wetted path, BIOCOR pumps provide superior containment and utilize ball-lifting magnets that can be attached to the pump housing from the outside at the location of the four ball valves. With the use of magnets, the ball valves can be lifted from their seats, allowing the pump to be drained entirely without needing to be disassembled or removed from the application. This enables clean-in-place (CIP) and sanitize-in-place (SIP) capabilities.

BIOCOR Series pumps from Almatec are also equipped with the patented PERSWING P® air-control system, which ensures accurate reversal of the main piston and low noise levels. The suction and discharge ports are offered in a clamp sanitary connection for inlet/outlet, but are available in a variety of sanitary threads, while the diaphragms, ball valves and O-rings are made of PTFE or EPDM. In addition, BIOCOR pumps have earned certifications for hygienic design and cleanability from the EHEDG organization, as well as material compliance as stipulated by the FDA and the European directive EC1935/2004.

Almatec will also display its solid block PTFE E-Series diaphragm pumps. The E-Series pumps are specifically designed for not only permanent applications, but also for single-use applications handling critical and even hazardous biopharmaceutical substances. The E-Series pumps are designed for use in advanced applications where high chemical compatibility and full containment/leak free design are required. Yet, the simplicity of design and operation makes the E-Series safe and economical for even single-use applications without compromising the highest standards. The E-Series also features no mechanical seals, utilizing stainless steel ring technology instead to increase protection from leaks by creating a consistent compression around the ring for higher torque.

For more on Almatec, please visit INTERPHEX Booth No. 2253 or go to almatec.de.

About Almatec:

Almatec Maschinenbau GmbH is one of the world’s leading manufacturers of pneumatic diaphragm pumps. Almatec owns numerous patents and has one of the largest ranges in the field of pneumatic diaphragm pumps. Almatec — headquartered in Kamp-Lintfort, Germany — is part of PSG®, a Dover company. For more information on Almatec or PSG, please go to almatec.de or psgdover.com.

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…