Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Almatec® BIOCOR Series Pumps on Display at Anuga FoodTec 2015

Industry News
Almatec BIOCOR Series Pumps

Almatec® BIOCOR Series Pumps on Display at Anuga FoodTec 2015

Almatec, part of PSG®, a Dover Company and premier manufacturer of sanitary air-operated double-diaphragm (AODD) pumps, is pleased to announce that it will be exhibiting in Hall 9.1, Stand E091 at the upcoming Anuga FoodTec 2015. Anuga FoodTec is an international trade fair for the food and drink processing industry. The exhibition will be held from March 24-27 in Cologne, Germany.

Almatec BIOCOR Series PumpsAlmatec BIOCOR Series pumps have been specifically designed for sterile applications, and meet the strict standards, regulations and operational requirements that govern the food and beverage industry because they contain no horizontal areas. The B20 and B32 models utilize ball-lifting magnets that can be attached to the pump housing from the outside at the location of the four ball valves. With the use of magnets, the ball valves can be lifted from their seats, allowing the pump to be drained entirely without needing to be disassembled or removed from the application. This enables clean-in-place (CIP) and sanitize-in-place (SIP) capability.

BIOCOR Series pumps from Almatec are equipped with the patented PERSWING P® air-control system, which ensures accurate reversal of the main piston and low noise levels. The suction and discharge ports are offered in a clamp sanitary connection for inlet/outlet, but are available in a variety of sanitary threads, while the diaphragms, ball valves and O-rings are made of PTFE or EPDM. BIOCOR Series pumps are available in three sizes – B20, B32 and B40 – with maximum capacities of 15 to 70 gpm (3.5 to 17 m3/h) at a maximum discharge pressure of 100 psi (7 bar). The material for the wetted housing parts is electropolished 316L stainless steel with a center block of PE conductive.

In addition, BIOCOR pumps have earned certifications for hygienic design and cleanability from both the 3A and EHEDG organizations, in addition to material compliance as stipulated by the FDA.

For more on Almatec pumps, please visit almatec.de.

 

Related Articles

Registration Opens for IMTS 2024

Registration Opens for IMTS 2024

Registration has opened for IMTS 2024 – The International Manufacturing Technology Show, taking place Sept. 9-14 at McCormick Place in…

Related Whitepapers

Upside Down Condos [Case Study]

This condo tower (324 units on 13 floors) had completed a previous retrofit that unfortunately left the variable speed pumps operating in a fixed mode…

Ras Al Khaimah saves 20% energy and 12% OPEX in wastewater pumping system

RAKWA is the RAK wastewater agency responsible for designing, building, operating, and maintaining all the public wastewater systems. Ras Al Khaimah—known as RAK—is the northernmost…

Intelligent Pumps Exceed Savings Estimates (Commercial Facility Installation Casestudy)

Design Envelope 6800 boosters reduced energy consumption by 76% compared to previous boosters, resulting in annual cost savings of $4,400 per system. Background The Heron’s…

Centaur’s Wireless Battery-powered Gateway

Our Solution Wireless sensors combined with a wireless battery-powered gateway can provide a flexible, safe, cost-effective, and reliable solution for collecting continuous condition monitoring data…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *