Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Helping a local business owner reach maximum efficiency

AllightPrimax
AllightPrimax local business

Helping a local business owner reach maximum efficiency

Recently, our team worked with a local farmer in rebuilding his pump and engine to maximize on efficiency. Charlton is a farm owned by Ian Russell. It has been in his family for 100 years and is part of the very fabric of his community. The farm produces organic goods and he is a fourth-generation owner of the business.

AllightPrimax farmer's-sykes-pump-engineOur East Coast Service Manager, Jason Davidson was introduced to Ian who was using a Perkins engine within his pump to transfer water from the Hunter River to his irrigation system.

AllightPrimax farmer's-sykes-pump-engineWhen the client started the conversation with our team, it became very clear that his Perkins engine was redundant. Initially, Ian wanted to rebuild his old engine but, once realizing that this wasn’t viable, the conversation turned to a complete engine replacement.

East Coast Service Manager, Jason Davidson, comments;

“I quoted Ian for a new engine from stock and reached out to him to see if he could send his existing pump in order to conduct the swap over. Upon further inspection, we proposed custom building a new pump to go with the engine. Being mindful to keep costs down, our team ensured we repurpose resources where possible. We sent a concept drawing to the client and, once approved, the manufacturing process began.”

AllightPrimax farmer's-sykes-pump-engineAfter the project was successfully completed, Ian invited our team to lunch to celebrate a great job.

 

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…