The Study This field survey was conducted at Hormel Foods, Freemont, Nebraska. Voltage readings were taken from the shafts of VFD-driven motors throughout the plant to demonstrate the presence of […]
Milk is the basic ingredient in the production of a long list of dairy products and by-products ranging from whole pasteurized milk to cheese, to derivatives such as whey, agglomerated […]
Two easily overlooked, yet extremely critical parameters when evaluating and specifying torque transducers are – Mechanical Overload Rating and Electrical Overrange. Each is important, but often confused and misunderstood. Overload […]
If you’re uncertain about the correct application of Durlon Joint Sealant during installation, we’ve got you covered with these 5 easy steps. Enhance your installation process by downloading Durlon’s Joint […]
Robust Motor Design Submersible motors are designed for a wide range of applications, such as deep well water supply, irrigation and pressure boosting. To have a robust insulation system, the […]
At the Pacific Container Terminal in Long Beach, California, huge cranes lift boxcar-sized containers, arranging them neatly on trains, trucks, and the decks of ships. If the cranes are not […]
Along with solar power, wind power is the fastest growing source of renewable energy. However, inverter-induced voltage can damage the bearings of wind power generators and lead to downtime. One […]
There are many reciprocating pump manufacturers and within them, there are several different pump models. To make the ordering process more efficient, use this simple checklist to ensure that you […]
In the late 1950s, while Jim Vaughan and his son Larry worked in their repair shop helping local dairy farmers fix clogging manure systems, they came up with a plan […]
Over time wear and tear can reduce the accuracy of all test and calibration equipment. It can also be impacted by contamination, environmental exposure, and damage. At Druck, we have […]
Route to Market (RTM) In Flowserve context, the RTM is via the wide use of distributors in many parts of the world, and is especially true for the North American […]