Pumping fluids at extreme temperatures presents many challenges to the shaft sealing system. It must ensure the pumped fluid is safely contained while providing long-term reliability. Many pump operators are […]
Avoiding compressor dry gas seal contamination Dry gas seals are a crucial part of today’s centrifugal compressors. With dry gas seals, machined-in lift profiles on one side of the seal […]
There are many methods to pressurize the barrier fluid for a dual pressurized mechanical seal. Each method, or piping plan, uses a different mechanism to apply the pressure to the […]
In this technical whitepaper from Fluid Sealing Association Member, Richard Albery, Senior Gas Seal Engineer at John Crane, learn about how to seal high-speed shafts in pumps and compressors.
Water moves in a never-ending cycle, powered by nature to renew and replenish the Earth and all it’s inhabitants. Download this infographic, provided by the U.S. Department of Agriculture’s Natural […]
New Belgium Brewing Company (NBB) has conducted on-site wastewater treatment at their Asheville, NC brewery in phases. As part of Phase 2, NBB elected to go against historical convention and […]
The challenges facing process industries have changed although they continue to pump fluids, some hazardous or toxic. Safety and reliability are still of prime importance. However, operators increase speeds, pressures, […]
The intent of this specification is to work in partnership with Electric Motor suppliers to supply quality motors that consistently perform with the highest efficiency, improved life cycle and lowest […]
Combined cycle power stations are quick to build, extremely efficient, and release only limited amounts of CO2. Download this chart of a combined cycle power station circuit.
The development of a multistage axial fan using contra-rotating wheels at each stage is described here. The outer diameter of the fan is 120 mm and the rotational speed for […]
As a global supplier for the Oil, Gas & Petrochemical industry, WEG is in full compliance with the new increased safety (Ex ec and Ex eb) marking, according to IEC/EN […]