“Smart Conveying Technology” (SCT) provides the fastest possible maintenance times for your pump. Assembling and dismantling seepex pumps has never been easier, and the lifecycle costs of our pumping solutions have never been lower.
SCT is the next logical development after “Smart Stator Technology”. By separating the Stator into two halves, we radically optimized pumping technology. Since it was launched, this globally patent pending innovation has been successfully installed in thousands of pump installations. Now it is also possible to replace the rotor in just a few easy steps requiring minimal time.
Progressive cavity pumps with SCT no longer have to be removed from the installation for maintenance. Dismantling and reassembly of piping and the removal of other equipment components are eliminated. Due to the integrated retensioning device, a simple readjustment of the stator increases the service life of stator and rotor essentially. With “Smart Conveying Technology” speed and extended service life work together in perfect harmony.
The SCT has application potential for almost every fluid product. The ease of maintenance is primary benefit. The greatest benefits will come to wastewater management systems and food handling systems. The product was successfully tested at the biogas plant in Lünen, Germany. The pump has been in successful operation since June 2010.
The SCT design allows the stator to be re-adjusted giving longer stator and rotor life compared to conventional designs.
– Quick and easy maintenance: Huge reductions in time and effort required to replace worn components. No need to remove the discharge pipe work, making any mis-alignment of existing installed pipe work no longer an issue. Cuts maintenance time to 25% of standard Progressive Cavity Pump Design.
-Low life cycle costs (short assembly times, short maintenance downtime, reduced costs for spare parts, and savings in storage and transport costs).
– Smaller footprint: Less space is required for installation, as no stator removal distance needs to be built into the original design plans.
– Easy handling during maintenance due to lighter components.
– Eco friendly: As the stator is not bonded to a tube only the rubber components are replaced when worn, making them acceptable to recycling costs. Costs are reduced to 75% of a standard PC pump.
“Upgrading to SST has shown real benefit to the process here at Wargrave. A complete rebuild has been replaced with a simple adjustment to restore flow and we have also been able to de-rag and de-ice frozen pumps in a matter of minutes, significantly reducing costs and interruptions to the process. We are very pleased.”