Sentrix Gas Flow Measurement

Sentrix™ flow measurement technology provides highly accurate, easy-to-use solutions for measuring and tracking packing case vent flow in gas compressors.

Multiple configurations are available to suit your gas monitoring needs:

• Portable meters for periodic, manual measurement of gas leakage
• Inline meters for continuous, automatic collection of flow data
• Insertion-style inline meters for line sizes ranging from 2 to 24 inches (51 to 610 mm)

All Sentrix meters are accurate to ±1% reading, ± 0.5% full scale (at calibrated conditions). With 100:1 turndown and flow ranges from 0.01 to 559 SCFM (0.01 to 950 NCMH), Sentrix meters measure a wide flow range, with superior sensitivity in extremely low and high flow conditions.

Units feature automatic pressure and temperature compensation and are capable of measuring multiple gases without the need for re-calibration.

Sentrix inline meters are calibrated for a specific gas composition. Calibrations are available for most gases, including nitrogen/air, hydrogen, propane, methane and carbon dioxide. Sentrix portable meters are provided with six field-selectable factory gas calibrations.

Sentrix meters are built for durable performance and designed for ease of use. Units deliver reliable, clog-free operation, even with lubricated machines. Portable meters feature high-resolution, touch panel displays for convenient operation.

Sentrix meters are convenient, cost-effective solutions for meeting US EPA Greenhouse Gas Reporting Rule: Subpart W (40 CFR Part 98). The high accuracy of thermal mass flow measurement satisfies BAMM (Best Available Measurement Methods) requirements and is the only technology capable of measuring extremely low leakage from packing cases. Sentrix meters provide direct measurement of gases, which is required by Subpart W of the EPA rule for reciprocating compressor rod packing emissions.

Flow information is easily accessible for reporting and analysis. Data captured by the portable meter can be stored in the unit and downloaded to a PC or USB storage device, while data from inline and insertion meters is transmitted to user systems through an easy-to-use interface.

Precise measurement of leakage through the packing case vent provides an opportunity to monitor the performance and condition of rod packing. Increasing leakage is an early warning of packing wear, and early detection allows operators to plan for repairs and utilize condition-based maintenance.

Accurate low-flow sensing also provides reliable and accurate data for comparing the effectiveness of various packing options.