Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

A ready to install dry-well complete with duplex pumps, controls, and valves drops right into place for the deepest lift station in France

Industrial Flow Solutions
IFS A ready to install dry-well complete with duplex pumps, controls, and valves drops right into place for the deepest lift station in France

A ready to install dry-well complete with duplex pumps, controls, and valves drops right into place for the deepest lift station in France

Overview

The lift station of St Romain en Giers is operated by the French Water Company Lyonnaise des Eaux. This is the deepest lift station in France, at 28ft deep. This lift station was installed with an OverWatch™ Direct In-Line Packaged Lift Station (PLS) System, which is a turnkey ready, stainless steel pumping system. The PLS eliminates the hazards associated with traditional wet wells: cloggedpumps, odor emissions, and dangerous gases and entry.

There is no wet well; the duplex pumping system and valving is contained in the prefabricated lift station. The PLS is equipped with a OW61R-2VV-15Hp OverWatch™ Direct In-Line Pump System designed for a flow of 176gpm and 70ft of head. This system has allowed wastewater to pass under the highway A47 and Giers River in France since 2014.

The technical manager Frédéric Delegue testifies that the operation of this pumping station is very easy and economical. There is no more screening, cleaning, or improper failures. There is also minimal on-site intervention of the operations. The OverWatch™ PLS Systems’ frequency converters allow for energy savings as well.

Eliminating the wet well to maximize safety; minimize maintenance

The OverWatch™ Direct In-line Pumping Technology creates an environment that eliminates wet well maintenance, exposure to dangerous gases and hazards associates with retained effluent, while saving 30% on energy costs and 65% total savings over the life of the pump. Lifting liquid as it arrives removes the opportunity for whip, fats, oils or greases to build up and solidify. The VFD controlled pump allow the system to adjust it’s performance real-time; reversing operation to remove clogs. With over 2000 installations globally, OverWatchTM is maximizing safety and minimizing risk by retrofitting current lift stations all over the world.

Benefits

  • Eliminates the wet well and hazards associated with them
  • Constant self-monitoring operation allows the system to adapt real-time to the environment, adjusting motor performance tothe incoming flow and eliminating potential clogs withouthuman intervention
  • Reduced maintenance; no screen or well cleaning; no scheduledsite visits.

Applications

  • Municipal retrofits or new wet wells
  • Residential, commercial or industrial ejector pumps
  • In-line pipe booster systems

Related Articles

Related Whitepapers

BEP Pump System Optimization Study of a Canola Oil System

Ishwar Dhere, Process Engineer with Stantec Resourcenet India was tasked with analyzing estimated pump head, normal operating line velocities, and pressure analysis for a new…

CFturbo BLADERUNNER: Centrifugal Pump Design and Model Variation

CFturbo, the conceptual Turbomachinery design code, enables engineers to design high-efficiency centrifugal pumps straightforwardly from scratch, or based on a given reference geometry. The all-new…

Performance Prediction: A Unique Approach for the Aftermarket

Hydro’s software has allowed CFTurbo to improve the optimize the performance of equipment and its fit to its system to make dramatic efficiency and reliability…

Corrective vs. Preventive Maintenance: Which is Better?

Corrective Maintenance This is performed only after a failure occurs in the equipment, which can lead to unexpected downtime and costly repairs. Although it is…