Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

European Commission kick-off meeting for ecodesign measures hosted by Europump on 6 March 2012

Industry News

European Commission kick-off meeting for ecodesign measures hosted by Europump on 6 March 2012

“This is the first time that Europump has the opportunity to host a Kick-Off Meeting for new ErP working Lots, “ says Frank Ennenbach, Europump Standards Commission Chairperson. “ Europump is looking forward to meeting environmental NGOs, the consultant and the European Commission. This shows the importance of the Europump “Extended Product Approach” to the EU Commission. Europump trusts that the Kick-Off Meeting will herald the start of intensive cooperation with all stakeholders.” 

The meeting will take place on 6 March 2012 in Brussels at the Europump premises.

It will cover the preparatory studies of the ecodesign Directive 2009/125/EC for Lots 28 to 31.

The meeting will start with an informal lunch for delegates. The European Commission will open the proceedings by giving the general policy objectives, its view on the extended product approach and information about the horizontal mandate M495. Discussions will continue in the plenary session on motors (Lot 30) followed by parallel sessions on pumps (Lots 28 and 29) and compressors (Lot 31).

The ecodesign Directive establishes a legal framework for the adoption of implementing measures to promote the ecodesign of energy-related products. Energy-related products include energy-using products, but also products which do not consume energy but whose use has an impact on energy consumption. The scope of the Directive includes all environmental impacts from all energy-related products. However the Commission will only develop implementing measures for energy-related products having a significant environmental impact and improvement potential.

The scope of the Lots is as follows:

Lot 28: Pumps (extended product approach including motors, VSD and controls, where appropriate) for private and public waste water (including all stages including buildings, networks and treatment facilities) and for fluids with high solid content

Lot 29: Pumps (extended product approach including motors, VSD and controls, where appropriate) for private and public swimming pools, ponds, fountains and aquariums, as well as clean water pumps larger than those regulated under Lot 11 Lot 30: Products in motor systems outside the scope of the Regulation 640/2009 on electric motors, such as special purpose inverter duty motors (asynchronous servo motors), permanent magnet motors, motors cooled by their load (fans), including motors and products under Article 1, Points 2(b), (c) and (d) and including drives, such as soft starters, torque or variable speed drives (VSD) from 200W – 1000kW. The study should also cover motors in the scope of the Regulation 640/2009 from 750kW – 1000kW.

Lot 31: Products in motor systems outside of the scope of Lot 30 and the Regulation 640/2009 on electric motors, in particular compressors, including small compressors, and their possible drives.

The general objective of the mandate M495 is to provide European standards to enable the implementation of the ecodesign Directive 2009/125/EC and its implementing measures. This mandate aims at ensuring an effective standardisation process.EUROPUMPDIAMANT BUILDINGBD AREYERS LN 80B1030 BRUXELLES/BRUSSEL – HTTP://EUROPUMP.EU EUROPEAN ASSOCIATION OF PUMP MANUFACTURERS – ASSOCIATION EUROPÉENNE DES CONSTRUCTEURS DE POMPES EUROPAISCHE VEREINIGUNG DER PUMPENHERSTELLER – ASSOCIAZIONE EUROPEA DEI PRODUTTORI DI POMPE

About Europump : Europump, the European Association of Pump Manufacturers, was established in 1960. It represents 18 National Associations in 15 EU Member States, Turkey, Russia & Switzerland. Europump members represent more than 450 companies with a collective production worth more than €10 billion and employing 100,000 people in Europe. The ever improving performance of liquid pumps increases the productivity of end user sectors and contributes to competitiveness and growth. Pump manufacturing is a growing and SME-driven sector. With almost half of all world exports and 40% of major patent applications, the Western European pump industry is the economic, commercial and technological leader. Europump’s ID in the Commission Register of Interest representatives is: 07655452075-36 

Related Articles

Related Whitepapers

Performance Prediction: A Unique Approach for the Aftermarket

Hydro’s software has allowed CFTurbo to improve the optimize the performance of equipment and its fit to its system to make dramatic efficiency and reliability…

Corrective vs. Preventive Maintenance: Which is Better?

Corrective Maintenance This is performed only after a failure occurs in the equipment, which can lead to unexpected downtime and costly repairs. Although it is…

Torque Sensors For Any Application

This guide from S. Himmelstein & Company details their torque sensor solutions, designed to meet the demands of any industry. Learn about: Ultra-Precise Spline Drive…

What is Water Hammer and Why It Is Important to Prevent?

Water hammer (or hydraulic shock) is the momentary increase in pressure inside a pipe caused by a sudden change of direction or velocity of the…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *